RS PRO Black Nylon Rod, 1m x 16mm Diameter
Tehnička dokumentacija
Tehnički podaci
Proizvođač
RS ProBoja
Black
Length
1m
Material
Nylon
Form
Rod
Rod Diameter
16mm
Density
1.14g/cm³
Tensile Strength
75 MPa
Maximum Operating Temperature
+170°C
Flammability Rating
UL 94 HB
Elongation
25%
Water Absorption
7%
Zemlja podrijetla
Germany
Detalji o proizvodu
RS PRO Molybdenum Disulphide filled Nylon 66 Rod
A Nylon 66 rod optimised with a Molybdenum Disulphide for a low friction and self-lubricating engineering rod capable of handing high temperatures and high mechanical strength applications.
Nylon 66 is a high-performance thermoplastic with excellent mechanical properties. It has a high level of machineability, a high tensile strength, stiffness and a high level of heat resistance.
Unaffected by chlorinated hydrocarbons, impact resistant with a high abrasion and ultraviolet resistance the Nylon 66 rods are ideal for a wide range of uses. These include higher stress applications such as the creation of bushes, friction bearings, gears, wheels, and machine parts.
Nylatron® / MoS2 Filled Nylon
These materials are abrasion resistant and self-lubricating and have reasonably good chemical resistance to weak acids.
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
€ 52,17
€ 52,17 1 mnoštvo od 3 (bez PDV-a)
€ 65,21
€ 65,21 1 mnoštvo od 3 (s PDV-om)
1
€ 52,17
€ 52,17 1 mnoštvo od 3 (bez PDV-a)
€ 65,21
€ 65,21 1 mnoštvo od 3 (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
1
Informacije o stanju skladišta trenutno nisu dostupne.
| količina | jedinična cijena |
|---|---|
| 1 - 2 | € 52,17 |
| 3 - 9 | € 49,26 |
| 10 - 29 | € 48,53 |
| 30+ | € 45,96 |
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Tehnička dokumentacija
Tehnički podaci
Proizvođač
RS ProBoja
Black
Length
1m
Material
Nylon
Form
Rod
Rod Diameter
16mm
Density
1.14g/cm³
Tensile Strength
75 MPa
Maximum Operating Temperature
+170°C
Flammability Rating
UL 94 HB
Elongation
25%
Water Absorption
7%
Zemlja podrijetla
Germany
Detalji o proizvodu
RS PRO Molybdenum Disulphide filled Nylon 66 Rod
A Nylon 66 rod optimised with a Molybdenum Disulphide for a low friction and self-lubricating engineering rod capable of handing high temperatures and high mechanical strength applications.
Nylon 66 is a high-performance thermoplastic with excellent mechanical properties. It has a high level of machineability, a high tensile strength, stiffness and a high level of heat resistance.
Unaffected by chlorinated hydrocarbons, impact resistant with a high abrasion and ultraviolet resistance the Nylon 66 rods are ideal for a wide range of uses. These include higher stress applications such as the creation of bushes, friction bearings, gears, wheels, and machine parts.
Nylatron® / MoS2 Filled Nylon
These materials are abrasion resistant and self-lubricating and have reasonably good chemical resistance to weak acids.
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda