RS PRO Blue Polyethylene Solder Sleeve 24.5mm Length 2.7 mm Cable Diameter 1.4 mm Cable Diameter
Tehnička dokumentacija
Tehnički podaci
Proizvođač
RS ProProduct Type
Solder Sleeve
Sub Type
Terminator
Sleeve Length
24.5mm
Material
Polyethylene
Dielectric Strength
1kV
Voltage
300V
Minimum Cable Diameter
1.4mm
Maximum Cable Diameter
2.7mm
Boja
Blue
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
125°C
Standards/Approvals
RoHS Compliant
Shrink Temperature
115°C
Series
GAST
Zemlja podrijetla
China
Detalji o proizvodu
RS Solder Sleeves
Heat-Shrinkable sleeves that provide strain relief, insulation, moisture resistance and protection for terminations from environmental damage. The transparent heat-shrinkable sleeve contains a pre-measured fluxed solder band and coloured hot-melt glue at each end. A labour-saving alternative to conventional wire and cable termination methods such as hand soldering or crimping. The solder sleeves are available in a range of sizes to suit cable diameters from 0.5 mm² to 22 mm², or as an assorted kit.
Informacije o stanju skladišta trenutno nisu dostupne.
€ 67,58
€ 67,58 1 vrećica od 100 (bez PDV-a)
€ 84,48
€ 84,48 1 vrećica od 100 (s PDV-om)
1
€ 67,58
€ 67,58 1 vrećica od 100 (bez PDV-a)
€ 84,48
€ 84,48 1 vrećica od 100 (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
1
| količina | jedinična cijena |
|---|---|
| 1 - 4 | € 67,58 |
| 5 - 49 | € 65,13 |
| 50+ | € 62,46 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
RS ProProduct Type
Solder Sleeve
Sub Type
Terminator
Sleeve Length
24.5mm
Material
Polyethylene
Dielectric Strength
1kV
Voltage
300V
Minimum Cable Diameter
1.4mm
Maximum Cable Diameter
2.7mm
Boja
Blue
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
125°C
Standards/Approvals
RoHS Compliant
Shrink Temperature
115°C
Series
GAST
Zemlja podrijetla
China
Detalji o proizvodu
RS Solder Sleeves
Heat-Shrinkable sleeves that provide strain relief, insulation, moisture resistance and protection for terminations from environmental damage. The transparent heat-shrinkable sleeve contains a pre-measured fluxed solder band and coloured hot-melt glue at each end. A labour-saving alternative to conventional wire and cable termination methods such as hand soldering or crimping. The solder sleeves are available in a range of sizes to suit cable diameters from 0.5 mm² to 22 mm², or as an assorted kit.