RS PRO Clip for use with 63.5 mm Dia. Capacitor Nylon
Tehnička dokumentacija
Tehnički podaci
Proizvođač
RS ProAccessory Type
Clip
For Use With
63.5 mm Dia. Capacitor
Material
Nylon
Diameter
63.5mm
Compatible Capacitor Diameter
63.5mm
Compatible Capacitor Shapes
Cylindrical
Clip Diameter
63.5mm
Zemlja podrijetla
United Kingdom
Detalji o proizvodu
Nylon Mounting Clamps
These RS brand clamps are designed to securely hold tubular capacitor components in place, offering connection protection from physical stresses such as vibration or shock. The advantage of the nylon design of this product is that it is less abrasive on the insulating sleeve of the capacitor, meaning that it is well suited where vibration is a factor.
The diameter of these clamps are approximate and it is possible for the clip to compress or expand to allow for small variations in capacitor case size. The clamps can be used for either surface or central mounting.
Screws and nuts are not supplied.
Accessories
This selection of mounting clips is designed to support and help prevent component failure caused by vibration and mechanical shock.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 2,62
komadno (u pakiranju od 5) (bez PDV-a)
€ 3,275
komadno (u pakiranju od 5) (s PDV-om)
5
€ 2,62
komadno (u pakiranju od 5) (bez PDV-a)
€ 3,275
komadno (u pakiranju od 5) (s PDV-om)
5
Kupujte na veliko
| količina | jedinična cijena | Po pakiranje |
|---|---|---|
| 5 - 45 | € 2,62 | € 13,10 |
| 50 - 95 | € 2,55 | € 12,75 |
| 100+ | € 2,48 | € 12,40 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
RS ProAccessory Type
Clip
For Use With
63.5 mm Dia. Capacitor
Material
Nylon
Diameter
63.5mm
Compatible Capacitor Diameter
63.5mm
Compatible Capacitor Shapes
Cylindrical
Clip Diameter
63.5mm
Zemlja podrijetla
United Kingdom
Detalji o proizvodu
Nylon Mounting Clamps
These RS brand clamps are designed to securely hold tubular capacitor components in place, offering connection protection from physical stresses such as vibration or shock. The advantage of the nylon design of this product is that it is less abrasive on the insulating sleeve of the capacitor, meaning that it is well suited where vibration is a factor.
The diameter of these clamps are approximate and it is possible for the clip to compress or expand to allow for small variations in capacitor case size. The clamps can be used for either surface or central mounting.
Screws and nuts are not supplied.
Accessories
This selection of mounting clips is designed to support and help prevent component failure caused by vibration and mechanical shock.