RS PRO E10 Indicator Light, Clear, 6.5 V, 300 mA, 4000h
Tehnička dokumentacija
Tehnički podaci
Proizvođač
RS ProVoltage Rating
6.5 V
Lamp Base
E10
Current Rating
300 mA
Diameter
10mm
Lamp Size
T3 1/4
Length
28 mm
Lens Colour
Clear
Luminosity
12 lm
Life Hours
4000h
Zemlja podrijetla
Korea, Republic Of
Detalji o proizvodu
Screw (LES, MES, SES)
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 14,75
1 pakiranje od 10 (bez PDV-a)
€ 18,44
1 pakiranje od 10 (s PDV-om)
1
€ 14,75
1 pakiranje od 10 (bez PDV-a)
€ 18,44
1 pakiranje od 10 (s PDV-om)
1
Kupujte na veliko
| količina | jedinična cijena |
|---|---|
| 1 - 9 | € 14,75 |
| 10 - 49 | € 13,50 |
| 50 - 249 | € 12,25 |
| 250+ | € 10,75 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
RS ProVoltage Rating
6.5 V
Lamp Base
E10
Current Rating
300 mA
Diameter
10mm
Lamp Size
T3 1/4
Length
28 mm
Lens Colour
Clear
Luminosity
12 lm
Life Hours
4000h
Zemlja podrijetla
Korea, Republic Of
Detalji o proizvodu
Screw (LES, MES, SES)
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.