RS PRO Hybrid, Permanent Magnet Stepper Motor, 1.89Nm Torque, 3.2 V, 1.8°, 56.4 x 56.4mm Frame, 6.35mm Shaft
Tehnička dokumentacija
Tehnički podaci
Proizvođač
RS ProStepper Motor Type
Hybrid, Permanent Magnet
Step Angle
1.8°
Holding Torque
1.89Nm
Number Of Wires
4
Supply Voltage
3.2 V
Frame Size
56.4 x 56.4mm
Shaft Diameter
6.35mm
Current Rating
2.8 A
Shaft Length
19mm
Depth
76mm
Resistance Per Phase
1.13Ω
Standards Met
RoHS Compliant
Detent Torque
72mNm
Detalji o proizvodu
High Torque Hybrid Stepper Motor
High Torque Hybrid Stepper Motors are motion systems allowing to have a high positioning precision.
With their high power already at low speed, their stall torque and the possibility to divide the steps in micro steps, stepper motors can provide direct and precise motions in a small volume.
0.9° and 1.8° Hybrid Stepper Motors
1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include:
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 139,50
komadno (bez PDV-a)
€ 174,38
komadno (s PDV-om)
1
€ 139,50
komadno (bez PDV-a)
€ 174,38
komadno (s PDV-om)
1
Tehnička dokumentacija
Tehnički podaci
Proizvođač
RS ProStepper Motor Type
Hybrid, Permanent Magnet
Step Angle
1.8°
Holding Torque
1.89Nm
Number Of Wires
4
Supply Voltage
3.2 V
Frame Size
56.4 x 56.4mm
Shaft Diameter
6.35mm
Current Rating
2.8 A
Shaft Length
19mm
Depth
76mm
Resistance Per Phase
1.13Ω
Standards Met
RoHS Compliant
Detent Torque
72mNm
Detalji o proizvodu
High Torque Hybrid Stepper Motor
High Torque Hybrid Stepper Motors are motion systems allowing to have a high positioning precision.
With their high power already at low speed, their stall torque and the possibility to divide the steps in micro steps, stepper motors can provide direct and precise motions in a small volume.
0.9° and 1.8° Hybrid Stepper Motors
1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include: