RS PRO GCS-104-PCM Series Self-Adhesive Thermal Interface Sheet, 0.12 mm Thick, 4 W/mK, 150 mm, 150mm
Tehnička dokumentacija
Tehnički podaci
Proizvođač
RS ProProduct Type
Thermal Interface Sheet
Thickness
0.12mm
Thermal Conductivity
4W/mK
Self-Adhesive
Yes
Trade Name
Thermal Interface Pad
Standards/Approvals
REACH, RoHS
Width
150mm
Length
150mm
Boja
Grey
Maximum Operating Temperature
125°C
Minimum Operating Temperature
-45°C
Series
GCS-104-PCM
Zemlja podrijetla
Taiwan, Province Of China
Detalji o proizvodu
RS PRO Phase Change Interface Material
RS PRO phase change materials are ideal for thermal management applications. Available in this range are phase change interface materials in sheets, resistor pads and as a dispensable paste.
Phase change materials work because they change their state with changes in temperature between the heat source and the heatsink. During this process, the material stores thermal energy which is then released as the material cools. This means that the material can absorb thermal energy as the heat is generated which helps to keep the desired component cool. This improves contact between the surfaces, completely fillling air gaps and increasing heat transfer.
Informacije o stanju skladišta trenutno nisu dostupne.
€ 38,87
€ 38,87 komadno (bez PDV-a)
€ 48,59
€ 48,59 komadno (s PDV-om)
1
€ 38,87
€ 38,87 komadno (bez PDV-a)
€ 48,59
€ 48,59 komadno (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
1
| količina | jedinična cijena |
|---|---|
| 1 - 9 | € 38,87 |
| 10 - 24 | € 36,27 |
| 25+ | € 36,13 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
RS ProProduct Type
Thermal Interface Sheet
Thickness
0.12mm
Thermal Conductivity
4W/mK
Self-Adhesive
Yes
Trade Name
Thermal Interface Pad
Standards/Approvals
REACH, RoHS
Width
150mm
Length
150mm
Boja
Grey
Maximum Operating Temperature
125°C
Minimum Operating Temperature
-45°C
Series
GCS-104-PCM
Zemlja podrijetla
Taiwan, Province Of China
Detalji o proizvodu
RS PRO Phase Change Interface Material
RS PRO phase change materials are ideal for thermal management applications. Available in this range are phase change interface materials in sheets, resistor pads and as a dispensable paste.
Phase change materials work because they change their state with changes in temperature between the heat source and the heatsink. During this process, the material stores thermal energy which is then released as the material cools. This means that the material can absorb thermal energy as the heat is generated which helps to keep the desired component cool. This improves contact between the surfaces, completely fillling air gaps and increasing heat transfer.