RS PRO Test Pin 1.5A
Tehnička dokumentacija
Tehnički podaci
Proizvođač
RS ProCurrent Rating
1.5A
Probe Tip Type
Point
Probe Socket Diameter
16.55mm
Zemlja podrijetla
Taiwan, Province Of China
Detalji o proizvodu
RS Pro Spring Probe with Pointed Head
Brought to you under the trusted RS Pro Brand, this pointed head spring spade terminal probe is designed to be used with an appropriate receptacle, which is ordered separately. Having the probe separate from the receptacle allows easy replacement of damaged spring test probes without disturbing the wiring.
The probe is suited ideally (in development and production) for automatic test equipment (ATE) and test jigs, where fast testing of multipoint PCBs and sub-assemblies is required. Receptacles can be push fitted into the mounting plate to provide an airtight seal without the use of adhesives.
The pointed head shape is used for plated-through holes and contamination free boards. It leaves no marks or indentations.
An inserter is available for the 2.54mm pitch receptacles (See stock number 434-790.)
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 6,39
komadno (u pakiranju od 5) (bez PDV-a)
€ 7,988
komadno (u pakiranju od 5) (s PDV-om)
5
€ 6,39
komadno (u pakiranju od 5) (bez PDV-a)
€ 7,988
komadno (u pakiranju od 5) (s PDV-om)
5
Kupujte na veliko
| količina | jedinična cijena | Po pakiranje |
|---|---|---|
| 5 - 20 | € 6,39 | € 31,95 |
| 25 - 45 | € 6,00 | € 30,00 |
| 50 - 95 | € 5,73 | € 28,65 |
| 100+ | € 5,45 | € 27,25 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
RS ProCurrent Rating
1.5A
Probe Tip Type
Point
Probe Socket Diameter
16.55mm
Zemlja podrijetla
Taiwan, Province Of China
Detalji o proizvodu
RS Pro Spring Probe with Pointed Head
Brought to you under the trusted RS Pro Brand, this pointed head spring spade terminal probe is designed to be used with an appropriate receptacle, which is ordered separately. Having the probe separate from the receptacle allows easy replacement of damaged spring test probes without disturbing the wiring.
The probe is suited ideally (in development and production) for automatic test equipment (ATE) and test jigs, where fast testing of multipoint PCBs and sub-assemblies is required. Receptacles can be push fitted into the mounting plate to provide an airtight seal without the use of adhesives.
The pointed head shape is used for plated-through holes and contamination free boards. It leaves no marks or indentations.
An inserter is available for the 2.54mm pitch receptacles (See stock number 434-790.)