RS PRO Test Pin 3A
Tehnička dokumentacija
Tehnički podaci
Proizvođač
RS ProCurrent Rating
3A
Contact Resistance
30mΩ
Probe Tip Type
Serrated
Probe Tip Type
Serrated
Probe Socket Diameter
24.7mm
Zemlja podrijetla
China
Detalji o proizvodu
RS Pro Spring Probe with Crosscut Head
Brought to you under the trusted RS Pro Brand, this crosscut headed spring spade terminal probe is designed to be used with an appropriate receptacle, which is ordered separately. Having the probe separate from the receptacle allows easy replacement of damaged spring test probes without disturbing the wiring.
The probe is suited ideally (in development and production) for automatic test equipment (ATE) and test jigs, where fast testing of multipoint PCBs and sub-assemblies is required. Receptacles can be push fitted into the mounting plate to provide an airtight seal without the use of adhesives.
The crosscut head is ideal for test lands, pads and leads. The sharp points penetrate and provide excellent electrical contact.
An inserter is available for the 2.54mm pitch receptacles (See stock number 434-790.)
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 4,97
komadno (u pakiranju od 5) (bez PDV-a)
€ 6,212
komadno (u pakiranju od 5) (s PDV-om)
5
€ 4,97
komadno (u pakiranju od 5) (bez PDV-a)
€ 6,212
komadno (u pakiranju od 5) (s PDV-om)
5
Kupujte na veliko
| količina | jedinična cijena | Po pakiranje |
|---|---|---|
| 5 - 20 | € 4,97 | € 24,85 |
| 25 - 45 | € 4,67 | € 23,35 |
| 50 - 95 | € 4,47 | € 22,35 |
| 100+ | € 4,24 | € 21,20 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
RS ProCurrent Rating
3A
Contact Resistance
30mΩ
Probe Tip Type
Serrated
Probe Tip Type
Serrated
Probe Socket Diameter
24.7mm
Zemlja podrijetla
China
Detalji o proizvodu
RS Pro Spring Probe with Crosscut Head
Brought to you under the trusted RS Pro Brand, this crosscut headed spring spade terminal probe is designed to be used with an appropriate receptacle, which is ordered separately. Having the probe separate from the receptacle allows easy replacement of damaged spring test probes without disturbing the wiring.
The probe is suited ideally (in development and production) for automatic test equipment (ATE) and test jigs, where fast testing of multipoint PCBs and sub-assemblies is required. Receptacles can be push fitted into the mounting plate to provide an airtight seal without the use of adhesives.
The crosscut head is ideal for test lands, pads and leads. The sharp points penetrate and provide excellent electrical contact.
An inserter is available for the 2.54mm pitch receptacles (See stock number 434-790.)