RS PRO Thermal Interface Pad, 0.127mm Thick, 2.5W/m·K, 49 x 21mm
Tehnička dokumentacija
Tehnički podaci
Proizvođač
RS ProDimensions
49 x 21mm
Thickness
0.127mm
Length
49mm
Width
21mm
Thermal Conductivity
2.5W/m·K
Self-Adhesive
No
Minimum Operating Temperature
-45°C
Maximum Operating Temperature
+125°C
Boja
Grey
Operating Temperature Range
-45 → +125 °C
Zemlja podrijetla
United Kingdom
Detalji o proizvodu
RS PRO Phase Change Interface Material
RS PRO phase change materials are ideal for thermal management applications. Available in this range are phase change interface materials in sheets, resistor pads and as a dispensable paste.
Phase change materials work because they change their state with changes in temperature between the heat source and the heatsink. During this process, the material stores thermal energy which is then released as the material cools. This means that the material can absorb thermal energy as the heat is generated which helps to keep the desired component cool. This improves contact between the surfaces, completely fillling air gaps and increasing heat transfer.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 2,47
komadno (u pakiranju od 10) (bez PDV-a)
€ 3,088
komadno (u pakiranju od 10) (s PDV-om)
10
€ 2,47
komadno (u pakiranju od 10) (bez PDV-a)
€ 3,088
komadno (u pakiranju od 10) (s PDV-om)
10
Kupujte na veliko
| količina | jedinična cijena | Po pakiranje |
|---|---|---|
| 10 - 40 | € 2,47 | € 24,70 |
| 50 - 90 | € 2,13 | € 21,30 |
| 100 - 240 | € 2,04 | € 20,40 |
| 250+ | € 1,77 | € 17,70 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
RS ProDimensions
49 x 21mm
Thickness
0.127mm
Length
49mm
Width
21mm
Thermal Conductivity
2.5W/m·K
Self-Adhesive
No
Minimum Operating Temperature
-45°C
Maximum Operating Temperature
+125°C
Boja
Grey
Operating Temperature Range
-45 → +125 °C
Zemlja podrijetla
United Kingdom
Detalji o proizvodu
RS PRO Phase Change Interface Material
RS PRO phase change materials are ideal for thermal management applications. Available in this range are phase change interface materials in sheets, resistor pads and as a dispensable paste.
Phase change materials work because they change their state with changes in temperature between the heat source and the heatsink. During this process, the material stores thermal energy which is then released as the material cools. This means that the material can absorb thermal energy as the heat is generated which helps to keep the desired component cool. This improves contact between the surfaces, completely fillling air gaps and increasing heat transfer.