RS PRO Thermal Interface Sheet, 0.2mm Thick, 2.5W/m·K, 150 x 150mm
Tehnička dokumentacija
Tehnički podaci
Proizvođač
RS ProDimensions
150 x 150mm
Thickness
0.2mm
Length
150mm
Width
150mm
Thermal Conductivity
2.5W/m·K
Self-Adhesive
No
Minimum Operating Temperature
-45°C
Maximum Operating Temperature
+125°C
Boja
Grey
Operating Temperature Range
-45 → +125 °C
Zemlja podrijetla
Taiwan, Province Of China
Detalji o proizvodu
RS PRO Phase Change Interface Material
RS PRO phase change materials are ideal for thermal management applications. Available in this range are phase change interface materials in sheets, resistor pads and as a dispensable paste.
Phase change materials work because they change their state with changes in temperature between the heat source and the heatsink. During this process, the material stores thermal energy which is then released as the material cools. This means that the material can absorb thermal energy as the heat is generated which helps to keep the desired component cool. This improves contact between the surfaces, completely fillling air gaps and increasing heat transfer.
€ 44,11
€ 44,11 komadno (bez PDV-a)
€ 55,14
€ 55,14 komadno (s PDV-om)
1
€ 44,11
€ 44,11 komadno (bez PDV-a)
€ 55,14
€ 55,14 komadno (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
1
Informacije o stanju skladišta trenutno nisu dostupne.
| količina | jedinična cijena |
|---|---|
| 1 - 9 | € 44,11 |
| 10 - 24 | € 41,15 |
| 25+ | € 41,03 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
RS ProDimensions
150 x 150mm
Thickness
0.2mm
Length
150mm
Width
150mm
Thermal Conductivity
2.5W/m·K
Self-Adhesive
No
Minimum Operating Temperature
-45°C
Maximum Operating Temperature
+125°C
Boja
Grey
Operating Temperature Range
-45 → +125 °C
Zemlja podrijetla
Taiwan, Province Of China
Detalji o proizvodu
RS PRO Phase Change Interface Material
RS PRO phase change materials are ideal for thermal management applications. Available in this range are phase change interface materials in sheets, resistor pads and as a dispensable paste.
Phase change materials work because they change their state with changes in temperature between the heat source and the heatsink. During this process, the material stores thermal energy which is then released as the material cools. This means that the material can absorb thermal energy as the heat is generated which helps to keep the desired component cool. This improves contact between the surfaces, completely fillling air gaps and increasing heat transfer.