Tehnička dokumentacija
Tehnički podaci
Insulation
Uninsulated
Minimum Wire Size AWG
8AWG
Maximum Wire Size AWG
8AWG
Thickness
1.1mm
Stud Size
10.5mm
Contact Material
Copper
Inner Ring Diameter
10.5mm
Minimum Wire Size mm²
10mm²
Maximum Wire Size mm²
10mm²
Boja
Silver
Outer Ring Diameter
18mm
Overall Length
21mm
Proizvođač
RS ProZemlja podrijetla
Taiwan, Province Of China
Detalji o proizvodu
EB052 E-block RFID Board
The EB052 board helps you to add RFID tags into your e-blocks designs using an on-board RFID module. The module can communicate with Miface, Icode, Ultralight, Hitag and EM cards using the on-board antenna.
Features & Benefits of the EB052 RFID Board
Comes with 2 Mifare and 2 Icode cards
Flowcode software support (free 30-day trial)
Suitable for a 5 V power supply
E-blocks Boards
E-blocks from Matrix Technology are small circuit boards with a block of electronics that are typically found in an electronic or embedded system. They be quickly snapped together to form a fully functioning systems and this ease of use makes them ideal for rapid prototyping.
Currently there are more than 50 E-Block boards available. From simple LED boards to sensors, Bluetooth, Motor Control, RFID, LCD Display, WiFi, GPS and many more. Whether you are PIC or Arduino programming or working with other hardware platforms there is sure to be something to suit your needs.
E-blocks are supported with software and courseware (including PIC, dsPIC, ARM and AVR Arduino IDE, Flowcode).
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 0,46
Each (In a Bag of 500) (bez PDV-a)
€ 0,575
Each (In a Bag of 500) (s PDV-om)
500
€ 0,46
Each (In a Bag of 500) (bez PDV-a)
€ 0,575
Each (In a Bag of 500) (s PDV-om)
500
Kupujte na veliko
količina | jedinična cijena | Po vrećica |
---|---|---|
500 - 2000 | € 0,46 | € 230,00 |
2500 - 4500 | € 0,36 | € 180,00 |
5000+ | € 0,31 | € 155,00 |
Tehnička dokumentacija
Tehnički podaci
Insulation
Uninsulated
Minimum Wire Size AWG
8AWG
Maximum Wire Size AWG
8AWG
Thickness
1.1mm
Stud Size
10.5mm
Contact Material
Copper
Inner Ring Diameter
10.5mm
Minimum Wire Size mm²
10mm²
Maximum Wire Size mm²
10mm²
Boja
Silver
Outer Ring Diameter
18mm
Overall Length
21mm
Proizvođač
RS ProZemlja podrijetla
Taiwan, Province Of China
Detalji o proizvodu
EB052 E-block RFID Board
The EB052 board helps you to add RFID tags into your e-blocks designs using an on-board RFID module. The module can communicate with Miface, Icode, Ultralight, Hitag and EM cards using the on-board antenna.
Features & Benefits of the EB052 RFID Board
Comes with 2 Mifare and 2 Icode cards
Flowcode software support (free 30-day trial)
Suitable for a 5 V power supply
E-blocks Boards
E-blocks from Matrix Technology are small circuit boards with a block of electronics that are typically found in an electronic or embedded system. They be quickly snapped together to form a fully functioning systems and this ease of use makes them ideal for rapid prototyping.
Currently there are more than 50 E-Block boards available. From simple LED boards to sensors, Bluetooth, Motor Control, RFID, LCD Display, WiFi, GPS and many more. Whether you are PIC or Arduino programming or working with other hardware platforms there is sure to be something to suit your needs.
E-blocks are supported with software and courseware (including PIC, dsPIC, ARM and AVR Arduino IDE, Flowcode).