Sensata Crydom Solid State Relay, 7.6 A Load, DIN Rail Mount
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Sensata / CrydomMaximum Load Current
7.6 A
Mounting Type
DIN Rail Mount
Control Voltage Range
18 → 30V ac/dc
Number of Poles
3
Terminal Type
Screw
Load Voltage Range
48 → 510V ac
Height
86.71mm
Length
45.31mm
Depth
96.02mm
Minimum Operating Temperature
-30°C
Maximum Operating Temperature
+80°C
Zemlja podrijetla
Mexico
Detalji o proizvodu
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.
Solid State Contactors
€ 143,29
€ 143,29 komadno (bez PDV-a)
€ 179,11
€ 179,11 komadno (s PDV-om)
1
€ 143,29
€ 143,29 komadno (bez PDV-a)
€ 179,11
€ 179,11 komadno (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
1
Informacije o stanju skladišta trenutno nisu dostupne.
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Sensata / CrydomMaximum Load Current
7.6 A
Mounting Type
DIN Rail Mount
Control Voltage Range
18 → 30V ac/dc
Number of Poles
3
Terminal Type
Screw
Load Voltage Range
48 → 510V ac
Height
86.71mm
Length
45.31mm
Depth
96.02mm
Minimum Operating Temperature
-30°C
Maximum Operating Temperature
+80°C
Zemlja podrijetla
Mexico
Detalji o proizvodu
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.