Tehnička dokumentacija
Tehnički podaci
Proizvođač
Sensata / CrydomMaximum Load Current
7.6 Arms
Mounting Type
DIN Rail
Maximum Load Voltage
510 Vrms
Minimum Load Voltage
48 Vrms
Maximum Control Voltage
30 V dc
Minimum Control Voltage
18 V dc
Switching Type
DC
Control Voltage Range
18 → 30 V dc
Minimum Load Current
0.15 A rms
Number of Poles
3
Contact Configuration
DPST
Terminal Type
Screw
Relay Type
Solid State Relay
Maximum Turn On Time
100 ms
Load Voltage Range
48 → 510Vrms
Series
DRC
Dimensions
45.3 x 95.6 x 86.7mm
Operating Temperature Range
-20 → +60°C
Depth
95.6mm
PRICED TO CLEAR
Yes
Special Features
7.6 Amp AC Semiconductor Motor Controller, LED Input Status Indicator, Load Voltage Range Upto 600 V ac
Standards Met
CE, CSA C22.2 No. 14, CULus, IEC, IEC 61000-6-2, UL 508
Minimum Operating Temperature
-20°C
Height
86.7mm
Capacitance
20pF
Maximum Operating Temperature
+60°C
Off State Leakage Current
5.5 mArms
Length
45.3mm
Zemlja podrijetla
Mexico
Detalji o proizvodu
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.
Solid State Contactors
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
P.O.A.
1
P.O.A.
1
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Sensata / CrydomMaximum Load Current
7.6 Arms
Mounting Type
DIN Rail
Maximum Load Voltage
510 Vrms
Minimum Load Voltage
48 Vrms
Maximum Control Voltage
30 V dc
Minimum Control Voltage
18 V dc
Switching Type
DC
Control Voltage Range
18 → 30 V dc
Minimum Load Current
0.15 A rms
Number of Poles
3
Contact Configuration
DPST
Terminal Type
Screw
Relay Type
Solid State Relay
Maximum Turn On Time
100 ms
Load Voltage Range
48 → 510Vrms
Series
DRC
Dimensions
45.3 x 95.6 x 86.7mm
Operating Temperature Range
-20 → +60°C
Depth
95.6mm
PRICED TO CLEAR
Yes
Special Features
7.6 Amp AC Semiconductor Motor Controller, LED Input Status Indicator, Load Voltage Range Upto 600 V ac
Standards Met
CE, CSA C22.2 No. 14, CULus, IEC, IEC 61000-6-2, UL 508
Minimum Operating Temperature
-20°C
Height
86.7mm
Capacitance
20pF
Maximum Operating Temperature
+60°C
Off State Leakage Current
5.5 mArms
Length
45.3mm
Zemlja podrijetla
Mexico
Detalji o proizvodu
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.