Tehnička dokumentacija
Tehnički podaci
Proizvođač
Silicon LabsProduct Type
Hall Effect Sensor
Sensor Type
Hall Effect Sensors
Number of Axis
1
Technology
CMOS
Mount Type
Surface
Magnetic Type
Open Drain SENT
Interface Type
SENT, PWM, Analogue
Maximum Frequency Response
7kHz
Minimum Frequency Response
10Hz
Minimum Supply Voltage
1.7V
Package Type
SOT-23
Maximum Supply Voltage
5.5V
Minimum Operating Temperature
-40°C
Sensitivity
3%
Pin Count
3
Maximum Operating Temperature
125°C
Width
1.6 mm
Series
Si721X
Height
1.15mm
Length
2.9mm
Standards/Approvals
Ford EMC-CS-2009.1, ISO 7637-2-2-11
Supply Current
5.5mA
Response Time
8.8μs
Automotive Standard
AEC-Q100
Detalji o proizvodu
Si721x Series Hall Effect Field Output Sensors
A range of Hall-effect magnetic sensors from Silicon Labs featuring chopper-stabilized Hall elements, low-noise amplifiers and 13-bit ADCs which provide a linear outputs proportional to magnetic field strength. The Si721x series are available with analogue, PWM or SENT (Single Edge Nibble Transmission) outputs. Typical applications include mechanical position sensing in consumer, industrial and automotive applications, camera image stabilization, zoom, and autofocus functions, sensing of control knobs and selector switches.
Hall Effect Sensors, Silicon Labs
Informacije o stanju skladišta trenutno nisu dostupne.
€ 2.670,00
€ 0,89 Each (On a Reel of 3000) (bez PDV-a)
€ 3.337,50
€ 1,112 Each (On a Reel of 3000) (s PDV-om)
3000
€ 2.670,00
€ 0,89 Each (On a Reel of 3000) (bez PDV-a)
€ 3.337,50
€ 1,112 Each (On a Reel of 3000) (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
3000
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Silicon LabsProduct Type
Hall Effect Sensor
Sensor Type
Hall Effect Sensors
Number of Axis
1
Technology
CMOS
Mount Type
Surface
Magnetic Type
Open Drain SENT
Interface Type
SENT, PWM, Analogue
Maximum Frequency Response
7kHz
Minimum Frequency Response
10Hz
Minimum Supply Voltage
1.7V
Package Type
SOT-23
Maximum Supply Voltage
5.5V
Minimum Operating Temperature
-40°C
Sensitivity
3%
Pin Count
3
Maximum Operating Temperature
125°C
Width
1.6 mm
Series
Si721X
Height
1.15mm
Length
2.9mm
Standards/Approvals
Ford EMC-CS-2009.1, ISO 7637-2-2-11
Supply Current
5.5mA
Response Time
8.8μs
Automotive Standard
AEC-Q100
Detalji o proizvodu
Si721x Series Hall Effect Field Output Sensors
A range of Hall-effect magnetic sensors from Silicon Labs featuring chopper-stabilized Hall elements, low-noise amplifiers and 13-bit ADCs which provide a linear outputs proportional to magnetic field strength. The Si721x series are available with analogue, PWM or SENT (Single Edge Nibble Transmission) outputs. Typical applications include mechanical position sensing in consumer, industrial and automotive applications, camera image stabilization, zoom, and autofocus functions, sensing of control knobs and selector switches.


