SMC Vacuum Filter - AMJ Series, NPT 1/4 Port Connection
Tehnička dokumentacija
Tehnički podaci
Proizvođač
SMCPort Connection
NPT 1/4
Manufacturer Series
AMJ
Typical Flow Rate
300L/min
Maximum Operating Pressure
1 (Operating) MPa, 1.5 (Proof) MPa
Port Connection Thread Size
1/4 in
Port Connection Thread Standard
NPT
Minimum Operating Temperature
+5°C
Maximum Operating Temperature
+60°C
Minimum Operating Pressure
-0.1MPa
Zemlja podrijetla
Japan
Detalji o proizvodu
SMC - AMJ Series Drain Separators for Vacuum
Removes water droplets from air by simply installing in vacuum equipment connection lines. Effective for removing water droplets from the air sucked into vacuum pumps and ejectors, etc.
Over 90% of droplets can be removed through the use of a special water droplet removing element. The provision of a drain cock makes it possible to discharge the drain manually after breaking the vacuum. Even when the element is saturated with water, there is almost no drop in pressure (increase in resistance). The element can be replaced with a single touch.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 262,00
komadno (bez PDV-a)
€ 327,50
komadno (s PDV-om)
1
€ 262,00
komadno (bez PDV-a)
€ 327,50
komadno (s PDV-om)
1
Kupujte na veliko
| količina | jedinična cijena |
|---|---|
| 1 - 4 | € 262,00 |
| 5 - 9 | € 256,00 |
| 10+ | € 255,00 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
SMCPort Connection
NPT 1/4
Manufacturer Series
AMJ
Typical Flow Rate
300L/min
Maximum Operating Pressure
1 (Operating) MPa, 1.5 (Proof) MPa
Port Connection Thread Size
1/4 in
Port Connection Thread Standard
NPT
Minimum Operating Temperature
+5°C
Maximum Operating Temperature
+60°C
Minimum Operating Pressure
-0.1MPa
Zemlja podrijetla
Japan
Detalji o proizvodu
SMC - AMJ Series Drain Separators for Vacuum
Removes water droplets from air by simply installing in vacuum equipment connection lines. Effective for removing water droplets from the air sucked into vacuum pumps and ejectors, etc.
Over 90% of droplets can be removed through the use of a special water droplet removing element. The provision of a drain cock makes it possible to discharge the drain manually after breaking the vacuum. Even when the element is saturated with water, there is almost no drop in pressure (increase in resistance). The element can be replaced with a single touch.