Tehnička dokumentacija
Tehnički podaci
Proizvođač
SMCConnector A
Push In 6 mm
Connector B
Push In 6 mm
Pneumatic Fitting Type
Bulkhead Threaded-to-Tube Adaptor
Connection Style
Threaded-to-Tube
Manufacturer Series
KQ2
Thread Material
Nickel Plated Brass
Body Material
Nickel Plated Brass
Minimum Operating Temperature
-5 °C, 0°C
Maximum Operating Temperature
+40 °C, +60°C
Finish
Nickel Plated
Maximum Operating Pressure
1 MPa, 3 MPa
Mounting Hole Diameter
15mm
Tube Connection A - Type
Push In
Zemlja podrijetla
Japan
Detalji o proizvodu
Bulkhead Union KQ2E
The KQ2E one-touch bulkhead unions are used to connect tubes through a panel and are suitable for use with nylon and polyurethane tubes. The special profile design of these bulkhead unions provide positive sealing under pressure without reducing the flow. When the connector is removed from the tube, the chuck and collet are released, thus preventing them from biting into the tube excessively.
Bulkhead Adapators
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 9,30
komadno (u pakiranju od 10) (bez PDV-a)
€ 11,625
komadno (u pakiranju od 10) (s PDV-om)
10
€ 9,30
komadno (u pakiranju od 10) (bez PDV-a)
€ 11,625
komadno (u pakiranju od 10) (s PDV-om)
10
Kupujte na veliko
količina | jedinična cijena | Po pakiranje |
---|---|---|
10 - 40 | € 9,30 | € 93,00 |
50+ | € 9,05 | € 90,50 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
SMCConnector A
Push In 6 mm
Connector B
Push In 6 mm
Pneumatic Fitting Type
Bulkhead Threaded-to-Tube Adaptor
Connection Style
Threaded-to-Tube
Manufacturer Series
KQ2
Thread Material
Nickel Plated Brass
Body Material
Nickel Plated Brass
Minimum Operating Temperature
-5 °C, 0°C
Maximum Operating Temperature
+40 °C, +60°C
Finish
Nickel Plated
Maximum Operating Pressure
1 MPa, 3 MPa
Mounting Hole Diameter
15mm
Tube Connection A - Type
Push In
Zemlja podrijetla
Japan
Detalji o proizvodu
Bulkhead Union KQ2E
The KQ2E one-touch bulkhead unions are used to connect tubes through a panel and are suitable for use with nylon and polyurethane tubes. The special profile design of these bulkhead unions provide positive sealing under pressure without reducing the flow. When the connector is removed from the tube, the chuck and collet are released, thus preventing them from biting into the tube excessively.