STAHLWILLE Angle Module, For Use With 730DR/40 Electromechanical torque wrench

RS kataloški broj:: 127-8043robna marka: STAHLWILLEProizvođački broj:: 96584628
brand-logo
Prikaži sve u Spanner Components & Accessories

Tehnička dokumentacija

Tehnički podaci

Proizvođač

STAHLWILLE

PRICED TO CLEAR

Yes

Zemlja podrijetla

Germany

Detalji o proizvodu

Angle Module For Manoskop® 730DR Electromechanical Torque Wrench

Angle module for use with the Manoskop® 730DR electromechanical torque wrench. Simply attach the module and connect to the torque wrench interface and the torque can be used for angle controlled tightening. The measurements are read off and settings made via the torque wrench. When the preset snug point is reached, the torque wrench automatically switches over to angle-controlled measurement in degrees. Depending on the options selected, the torque wrench can either cut out when the preset angle is reached or an alarm is heard.

Informacije o stanju skladišta trenutno nisu dostupne.

Provjerite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

P.O.A.

STAHLWILLE Angle Module, For Use With 730DR/40 Electromechanical torque wrench

1

Dostupno u više komada 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

P.O.A.

STAHLWILLE Angle Module, For Use With 730DR/40 Electromechanical torque wrench
Informacije o stanju skladišta trenutno nisu dostupne.

1

Dostupno u više komada 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

Tehnička dokumentacija

Tehnički podaci

Proizvođač

STAHLWILLE

PRICED TO CLEAR

Yes

Zemlja podrijetla

Germany

Detalji o proizvodu

Angle Module For Manoskop® 730DR Electromechanical Torque Wrench

Angle module for use with the Manoskop® 730DR electromechanical torque wrench. Simply attach the module and connect to the torque wrench interface and the torque can be used for angle controlled tightening. The measurements are read off and settings made via the torque wrench. When the preset snug point is reached, the torque wrench automatically switches over to angle-controlled measurement in degrees. Depending on the options selected, the torque wrench can either cut out when the preset angle is reached or an alarm is heard.