Tehnička dokumentacija
Tehnički podaci
Brand
STMicroelectronicsMotor Type
Brushed DC
Output Configuration
Dual Full Bridge
Maximum IGBT Collector Current
1.4A
Maximum Collector Emitter Voltage
52 V
Mounting Type
Surface Mount
Package Type
SOIC
Maximum Operating Supply Voltage
52 V
Pin Count
20
Minimum Operating Supply Voltage
8 V
Typical Switching Frequency
100kHz
Minimum Operating Temperature
-25 °C
Maximum Operating Temperature
+125 °C
Length
13mm
Height
2.35mm
Width
7.6mm
Dimensions
13 x 7.6 x 2.35mm
Zemlja podrijetla
Malaysia
Detalji o proizvodu
Motor Control Power Drivers, STMicroelectronics
The range of power drivers by STMicroelectronics are designed to drive a motor or a complex load through the logic commands at its input. They can be used with microcontrollers, DSPs or FPGAs in a motor or motion control system. The power drivers come in Dual Full Bridge, Full Bridge and 3 phase.
Motor Controllers & Drivers, STMicroelectronics
KM 513,40
KM 20,536 Each (Supplied on a Reel) (bez PDV-a)
KM 600,68
KM 24,027 Each (Supplied on a Reel) (s PDV-om)
Proizvodno pakovanje (kolut)
25
KM 513,40
KM 20,536 Each (Supplied on a Reel) (bez PDV-a)
KM 600,68
KM 24,027 Each (Supplied on a Reel) (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
Proizvodno pakovanje (kolut)
25
Informacije o stanju skladišta trenutno nisu dostupne.
količina | Jedinična cijena | Po kolut |
---|---|---|
25 - 45 | KM 20,536 | KM 102,68 |
50 - 120 | KM 20,047 | KM 100,23 |
125+ | KM 19,558 | KM 97,79 |
Tehnička dokumentacija
Tehnički podaci
Brand
STMicroelectronicsMotor Type
Brushed DC
Output Configuration
Dual Full Bridge
Maximum IGBT Collector Current
1.4A
Maximum Collector Emitter Voltage
52 V
Mounting Type
Surface Mount
Package Type
SOIC
Maximum Operating Supply Voltage
52 V
Pin Count
20
Minimum Operating Supply Voltage
8 V
Typical Switching Frequency
100kHz
Minimum Operating Temperature
-25 °C
Maximum Operating Temperature
+125 °C
Length
13mm
Height
2.35mm
Width
7.6mm
Dimensions
13 x 7.6 x 2.35mm
Zemlja podrijetla
Malaysia
Detalji o proizvodu
Motor Control Power Drivers, STMicroelectronics
The range of power drivers by STMicroelectronics are designed to drive a motor or a complex load through the logic commands at its input. They can be used with microcontrollers, DSPs or FPGAs in a motor or motion control system. The power drivers come in Dual Full Bridge, Full Bridge and 3 phase.