TE Connectivity Straight Black, Modified Polyolefin, 30mm
Tehnička dokumentacija
Tehnički podaci
Proizvođač
TE ConnectivityType
Straight
Inside Diameter Primary
30mm
Inside Diameter Secondary
30mm
Adhesive Lined
No
Material
Modified Polyolefin
Number of Breakouts
1
Boja
Black
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+135°C
Shrunk Diameter Primary
14.2mm
Shrunk Diameter Secondary
5.9mm
Detalji o proizvodu
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.
€ 39,26
€ 39,26 komadno (bez PDV-a)
€ 49,08
€ 49,08 komadno (s PDV-om)
Standard
1
€ 39,26
€ 39,26 komadno (bez PDV-a)
€ 49,08
€ 49,08 komadno (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
Standard
1
Informacije o stanju skladišta trenutno nisu dostupne.
| količina | jedinična cijena |
|---|---|
| 1 - 14 | € 39,26 |
| 15 - 49 | € 36,87 |
| 50+ | € 35,64 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
TE ConnectivityType
Straight
Inside Diameter Primary
30mm
Inside Diameter Secondary
30mm
Adhesive Lined
No
Material
Modified Polyolefin
Number of Breakouts
1
Boja
Black
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+135°C
Shrunk Diameter Primary
14.2mm
Shrunk Diameter Secondary
5.9mm
Detalji o proizvodu
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.