TE Connectivity Boot 222K1 Black, Fluid Resistant Elastomer, 43 mm
Tehnička dokumentacija
Tehnički podaci
Proizvođač
TE ConnectivityProduct Type
Heat Shrink Boot
Sub Type
Boot
Material
Fluid Resistant Elastomer
Number of Breakouts
1
Shrink Temperature
90°C
Boja
Black
Minimum Operating Temperature
-75°C
Maximum Operating Temperature
150°C
Minimum Inside Diameter
8mm
Maximum Inside Diameter
43mm
Maximum Shrunk Diameter
28mm
Standards/Approvals
No
Adhesive Backing
No
Series
222K1
Zemlja podrijetla
Mexico
Detalji o proizvodu
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.
Informacije o stanju skladišta trenutno nisu dostupne.
€ 21,46
€ 21,46 komadno (bez PDV-a)
€ 26,82
€ 26,82 komadno (s PDV-om)
1
€ 21,46
€ 21,46 komadno (bez PDV-a)
€ 26,82
€ 26,82 komadno (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
1
| količina | jedinična cijena |
|---|---|
| 1 - 14 | € 21,46 |
| 15 - 49 | € 20,60 |
| 50+ | € 20,31 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
TE ConnectivityProduct Type
Heat Shrink Boot
Sub Type
Boot
Material
Fluid Resistant Elastomer
Number of Breakouts
1
Shrink Temperature
90°C
Boja
Black
Minimum Operating Temperature
-75°C
Maximum Operating Temperature
150°C
Minimum Inside Diameter
8mm
Maximum Inside Diameter
43mm
Maximum Shrunk Diameter
28mm
Standards/Approvals
No
Adhesive Backing
No
Series
222K1
Zemlja podrijetla
Mexico
Detalji o proizvodu
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.