TE Connectivity, DuraSeal Butt Splice Connector, Blue, Insulated, Tin 16 → 14 AWG

RS kataloški broj:: 135-5110robna marka: TE ConnectivityProizvođački broj:: 454100-000
brand-logo
Prikaži sve u Splice Connectors

Tehnička dokumentacija

Tehnički podaci

Proizvođač

TE Connectivity

Splice Type

Butt

Wire Size

16 → 14 AWG

Overall Length

31.5mm

Diameter

4.6mm

Insulation

Insulated

Boja

Blue

Series

Duraseal

Contact Material

Copper

Contact Plating

Tin

Zemlja podrijetla

Mexico

Detalji o proizvodu

Splices

Approvals

UL

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

Approvals

UL Listed

Informacije o stanju skladišta trenutno nisu dostupne.

Provjerite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

P.O.A.

TE Connectivity, DuraSeal Butt Splice Connector, Blue, Insulated, Tin 16 → 14 AWG

P.O.A.

TE Connectivity, DuraSeal Butt Splice Connector, Blue, Insulated, Tin 16 → 14 AWG
Informacije o stanju skladišta trenutno nisu dostupne.

Tehnička dokumentacija

Tehnički podaci

Proizvođač

TE Connectivity

Splice Type

Butt

Wire Size

16 → 14 AWG

Overall Length

31.5mm

Diameter

4.6mm

Insulation

Insulated

Boja

Blue

Series

Duraseal

Contact Material

Copper

Contact Plating

Tin

Zemlja podrijetla

Mexico

Detalji o proizvodu

Splices

Approvals

UL

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

Approvals

UL Listed