TE Connectivity Transparent Polyolefin Solder Sleeve 32.5mm Length 2.8 → 7.3mm Cable Diameter
Tehnička dokumentacija
Tehnički podaci
Proizvođač
TE ConnectivityMinimum Cable Diameter
2.8mm
Maximum Cable Diameter
7.3mm
Sleeve Length
32.5mm
Material
Polyolefin
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Quantity
1
Boja
Transparent
Standards Met
ANSI J-STD-004, ANSI J-STD-006
Series
B-155
Shrink Temperature
+85°C
Zemlja podrijetla
Mexico
Detalji o proizvodu
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 2,06
komadno (u pakiranju od 100) (bez PDV-a)
€ 2,575
komadno (u pakiranju od 100) (s PDV-om)
100
€ 2,06
komadno (u pakiranju od 100) (bez PDV-a)
€ 2,575
komadno (u pakiranju od 100) (s PDV-om)
100
Kupujte na veliko
| količina | jedinična cijena | Po pakiranje |
|---|---|---|
| 100 - 1400 | € 2,06 | € 206,00 |
| 1500 - 4900 | € 1,98 | € 198,00 |
| 5000+ | € 1,96 | € 196,00 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
TE ConnectivityMinimum Cable Diameter
2.8mm
Maximum Cable Diameter
7.3mm
Sleeve Length
32.5mm
Material
Polyolefin
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Quantity
1
Boja
Transparent
Standards Met
ANSI J-STD-004, ANSI J-STD-006
Series
B-155
Shrink Temperature
+85°C
Zemlja podrijetla
Mexico
Detalji o proizvodu
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.