TE Connectivity Transparent Polyolefin Solder Sleeve 35.5mm Length 11.5 mm Cable Diameter 4 mm Cable Diameter
Tehnička dokumentacija
Tehnički podaci
Proizvođač
TE ConnectivityProduct Type
Solder Sleeve
Sub Type
Terminator
Sleeve Length
35.5mm
Material
Polyolefin
Dielectric Strength
2kV
Minimum Cable Diameter
4mm
Maximum Cable Diameter
11.5mm
Boja
Transparent
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
125°C
Standards/Approvals
ANSI J-STD-004, ANSI J-STD-006
Shrink Temperature
85°C
Series
B-155
Zemlja podrijetla
Mexico
Detalji o proizvodu
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.
Informacije o stanju skladišta trenutno nisu dostupne.
€ 160,00
€ 6,40 komadno (u pakiranju od 25) (bez PDV-a)
€ 200,00
€ 8,00 komadno (u pakiranju od 25) (s PDV-om)
25
€ 160,00
€ 6,40 komadno (u pakiranju od 25) (bez PDV-a)
€ 200,00
€ 8,00 komadno (u pakiranju od 25) (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
25
| količina | jedinična cijena | Po pakiranje |
|---|---|---|
| 25 - 350 | € 6,40 | € 160,00 |
| 375 - 1225 | € 6,17 | € 154,25 |
| 1250+ | € 6,09 | € 152,25 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
TE ConnectivityProduct Type
Solder Sleeve
Sub Type
Terminator
Sleeve Length
35.5mm
Material
Polyolefin
Dielectric Strength
2kV
Minimum Cable Diameter
4mm
Maximum Cable Diameter
11.5mm
Boja
Transparent
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
125°C
Standards/Approvals
ANSI J-STD-004, ANSI J-STD-006
Shrink Temperature
85°C
Series
B-155
Zemlja podrijetla
Mexico
Detalji o proizvodu
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.