TE Connectivity Transparent Polyolefin Solder Sleeve 16mm Length 1.1 → 2.9mm Cable Diameter

RS kataloški broj:: 542-5757robna marka: TE ConnectivityProizvođački broj:: B-155-1502
brand-logo
Prikaži sve u Solder Sleeves

Tehnička dokumentacija

Tehnički podaci

Proizvođač

TE Connectivity

Minimum Cable Diameter

1.1mm

Maximum Cable Diameter

2.9mm

Sleeve Length

16mm

Material

Polyolefin

Minimum Operating Temperature

-55°C

Maximum Operating Temperature

+125°C

Boja

Transparent

Series

B-155

Standards Met

ANSI J-STD-004, ANSI J-STD-006

Zemlja podrijetla

Mexico

Detalji o proizvodu

Wire Termination: Pin, Post & Tab

Each terminator consists of heatshrinkable sleeve containing prefluxed solder preform. To install, simply position the terminator over the pre-stripped wire/pin and apply heat. The sleeve will shrink and the solder will melt and flow, resulting in a perfectly soldered, insulated and strain relieved termination. On connectors where there are several pins to be terminated it is possible to position and recover an entire row of solder sleeves in one go.,Recommended for use with most connector pins/posts/tabs applications such as LED's, switches, multiple row/pin connectors.

You may be interested in

Informacije o stanju skladišta trenutno nisu dostupne.

Provjerite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

P.O.A.

TE Connectivity Transparent Polyolefin Solder Sleeve 16mm Length 1.1 → 2.9mm Cable Diameter

P.O.A.

TE Connectivity Transparent Polyolefin Solder Sleeve 16mm Length 1.1 → 2.9mm Cable Diameter
Informacije o stanju skladišta trenutno nisu dostupne.
You may be interested in

Tehnička dokumentacija

Tehnički podaci

Proizvođač

TE Connectivity

Minimum Cable Diameter

1.1mm

Maximum Cable Diameter

2.9mm

Sleeve Length

16mm

Material

Polyolefin

Minimum Operating Temperature

-55°C

Maximum Operating Temperature

+125°C

Boja

Transparent

Series

B-155

Standards Met

ANSI J-STD-004, ANSI J-STD-006

Zemlja podrijetla

Mexico

Detalji o proizvodu

Wire Termination: Pin, Post & Tab

Each terminator consists of heatshrinkable sleeve containing prefluxed solder preform. To install, simply position the terminator over the pre-stripped wire/pin and apply heat. The sleeve will shrink and the solder will melt and flow, resulting in a perfectly soldered, insulated and strain relieved termination. On connectors where there are several pins to be terminated it is possible to position and recover an entire row of solder sleeves in one go.,Recommended for use with most connector pins/posts/tabs applications such as LED's, switches, multiple row/pin connectors.

You may be interested in