TE Connectivity, DuraSeal Insulated Crimp Ring Terminal, M5 Stud Size 16 AWG 14 AWG Wire Size, Blue

RS kataloški broj:: 465-659robna marka: TE ConnectivityProizvođački broj:: DR-6-50
brand-logo
Prikaži sve u Ring Terminals

Tehnička dokumentacija

Tehnički podaci

Proizvođač

TE Connectivity

Product Type

Crimp Ring Terminal

Series

DuraSeal

Insulation

Insulated

Insulation Material

Nylon

Outer Ring Diameter

10mm

Inner Ring Diameter

5.3mm

Minimum Wire Size AWG

16AWG

Maximum Wire Size AWG

14AWG

Overall Length

32mm

Stud Size

M5

Boja

Blue

Contact Material

Copper Alloy

Contact Plating

Tin

Thickness

2mm

Standards/Approvals

No

Maximum Operating Temperature

125°C

Minimum Wire Size mm²

1.5mm²

Minimum Operating Temperature

-55°C

Maximum Wire Size mm²

2.5mm²

Zemlja podrijetla

Mexico

Detalji o proizvodu

TE Connectivity DuraSeal Ring Terminals

DuraSeal crimp ring terminals with an environmentally sealed wire connection providing insulation and protection to electrical connections from mechanical abuse, vibration, wire-pull out, abrasion as well as being resistant to water, salt and other contaminants. The barrels of these DuraSeal crimp ring terminals are covered in a heat-shrinkable nylon tubing lined with a hot-melt adhesive with is cut and abrasion resistant.

Approvals

UL

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

Approvals

UL Listed

Možda će vas zanimati
Prikaži sve u Ring Terminals

Informacije o stanju skladišta trenutno nisu dostupne.

€ 28,50

€ 0,57 komadno (u pakiranju od 50) (bez PDV-a)

€ 35,62

€ 0,712 komadno (u pakiranju od 50) (s PDV-om)

TE Connectivity, DuraSeal Insulated Crimp Ring Terminal, M5 Stud Size 16 AWG 14 AWG Wire Size, Blue

€ 28,50

€ 0,57 komadno (u pakiranju od 50) (bez PDV-a)

€ 35,62

€ 0,712 komadno (u pakiranju od 50) (s PDV-om)

TE Connectivity, DuraSeal Insulated Crimp Ring Terminal, M5 Stud Size 16 AWG 14 AWG Wire Size, Blue

Informacije o stanju skladišta trenutno nisu dostupne.

količinajedinična cijenaPo pakiranje
50 - 200€ 0,57€ 28,50
250+€ 0,54€ 27,00
Možda će vas zanimati

Tehnička dokumentacija

Tehnički podaci

Proizvođač

TE Connectivity

Product Type

Crimp Ring Terminal

Series

DuraSeal

Insulation

Insulated

Insulation Material

Nylon

Outer Ring Diameter

10mm

Inner Ring Diameter

5.3mm

Minimum Wire Size AWG

16AWG

Maximum Wire Size AWG

14AWG

Overall Length

32mm

Stud Size

M5

Boja

Blue

Contact Material

Copper Alloy

Contact Plating

Tin

Thickness

2mm

Standards/Approvals

No

Maximum Operating Temperature

125°C

Minimum Wire Size mm²

1.5mm²

Minimum Operating Temperature

-55°C

Maximum Wire Size mm²

2.5mm²

Zemlja podrijetla

Mexico

Detalji o proizvodu

TE Connectivity DuraSeal Ring Terminals

DuraSeal crimp ring terminals with an environmentally sealed wire connection providing insulation and protection to electrical connections from mechanical abuse, vibration, wire-pull out, abrasion as well as being resistant to water, salt and other contaminants. The barrels of these DuraSeal crimp ring terminals are covered in a heat-shrinkable nylon tubing lined with a hot-melt adhesive with is cut and abrasion resistant.

Approvals

UL

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

Approvals

UL Listed

Možda će vas zanimati