TE Connectivity, DuraSeal Butt Splice Connector, Blue, Insulated, Tin 10 AWG
Tehnička dokumentacija
Tehnički podaci
Proizvođač
TE ConnectivitySplice Type
Butt
Product Type
Splice Connector
Overall Length
36mm
Minimum Wire Size AWG
12 AWG
Diameter
4.6 mm
Maximum Wire Size AWG
10 AWG
Insulation
Insulated
Boja
Blue
Insulation Material
Nylon
Series
DuraSeal
Contact Material
Copper
Contact Plating
Tin
Standards/Approvals
No
Zemlja podrijetla
Mexico
Detalji o proizvodu
Splices
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
Informacije o stanju skladišta trenutno nisu dostupne.
€ 30,00
€ 0,60 komadno (u pakiranju od 50) (bez PDV-a)
€ 37,50
€ 0,75 komadno (u pakiranju od 50) (s PDV-om)
50
€ 30,00
€ 0,60 komadno (u pakiranju od 50) (bez PDV-a)
€ 37,50
€ 0,75 komadno (u pakiranju od 50) (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
50
| količina | jedinična cijena | Po pakiranje |
|---|---|---|
| 50 - 200 | € 0,60 | € 30,00 |
| 250 - 1200 | € 0,56 | € 28,00 |
| 1250 - 2450 | € 0,52 | € 26,00 |
| 2500 - 4950 | € 0,49 | € 24,50 |
| 5000+ | € 0,48 | € 24,00 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
TE ConnectivitySplice Type
Butt
Product Type
Splice Connector
Overall Length
36mm
Minimum Wire Size AWG
12 AWG
Diameter
4.6 mm
Maximum Wire Size AWG
10 AWG
Insulation
Insulated
Boja
Blue
Insulation Material
Nylon
Series
DuraSeal
Contact Material
Copper
Contact Plating
Tin
Standards/Approvals
No
Zemlja podrijetla
Mexico
Detalji o proizvodu
Splices
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed