LMV7219M7/NOPB Texas Instruments, Comparator, Push-Pull O/P, 2.7 → 5 V 5-Pin SC-70
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Texas InstrumentsComparator Type
General Purpose
Mounting Type
Surface Mount
Package Type
SC-70
Power Supply Type
Single
Output Type
Push-Pull
Number of Channels per Chip
1
Pin Count
5
Typical Single Supply Voltage
2.7 → 5 V
Dimensions
2 x 1.25 x 0.9mm
Length
2mm
Width
1.25mm
Height
0.9mm
Typical CMRR
85dB
Minimum Operating Temperature
-40 °C
Typical PSRR
85dB
Maximum Operating Temperature
+85 °C
PRICED TO CLEAR
Yes
Detalji o proizvodu
LMV series Low Voltage Comparators
Comparators, Texas Instruments
Texas Instruments’ range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.
Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
€ 4,09
€ 4,09 komadno (bez PDV-a)
€ 5,11
€ 5,11 komadno (s PDV-om)
Standard
1
€ 4,09
€ 4,09 komadno (bez PDV-a)
€ 5,11
€ 5,11 komadno (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
Standard
1
Informacije o stanju skladišta trenutno nisu dostupne.
| količina | jedinična cijena |
|---|---|
| 1 - 4 | € 4,09 |
| 5 - 9 | € 3,93 |
| 10 - 24 | € 3,73 |
| 25 - 49 | € 3,46 |
| 50+ | € 3,42 |
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Texas InstrumentsComparator Type
General Purpose
Mounting Type
Surface Mount
Package Type
SC-70
Power Supply Type
Single
Output Type
Push-Pull
Number of Channels per Chip
1
Pin Count
5
Typical Single Supply Voltage
2.7 → 5 V
Dimensions
2 x 1.25 x 0.9mm
Length
2mm
Width
1.25mm
Height
0.9mm
Typical CMRR
85dB
Minimum Operating Temperature
-40 °C
Typical PSRR
85dB
Maximum Operating Temperature
+85 °C
PRICED TO CLEAR
Yes
Detalji o proizvodu
LMV series Low Voltage Comparators
Comparators, Texas Instruments
Texas Instruments’ range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.
Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda