WAGO WAGO-I/O-CHECK 2 Windows Application PLC Programming Software Windows 98
Tehnička dokumentacija
Tehnički podaci
Proizvođač
WagoProduct Type
PLC Programming Software
Type of Software
Windows Application
Software Name
WAGO-I/O-CHECK 2
Operating System
Windows 98
Standards/Approvals
No
Zemlja podrijetla
Germany
Detalji o proizvodu
WAGO-I/O-CHECK - Commissioning Tool For WAGO-I/O-SYSTEM 750
WAGO-I/O-CHECK is an easy-to-use Windows application for operating and displaying a WAGO-I/O-SYSTEM 750 node without connecting the node to a fieldbus system.
The software reads the configuration from the node and displays it as an on-screen graphic. The graphic can be printed together with a configuration list as documentation.
With WAGO-I/O-CHECK, it is possible to display and determine the process data of the bus modules. The field wiring, including all sensors and actuators, can thus be checked before startup.
Application-specific settings, such as the baud rate or sensor types, can be made with select interface, Pt100 and thermocouple modules. For communicating between WAGO-I/O-CHECK and the node, the coupler must be connected at a PC’s vacant serial or USB port using the communication cable supplied in the kit with the system.
Wago I/O system range
Informacije o stanju skladišta trenutno nisu dostupne.
€ 282,43
€ 282,43 komadno (bez PDV-a)
€ 353,04
€ 353,04 komadno (s PDV-om)
1
€ 282,43
€ 282,43 komadno (bez PDV-a)
€ 353,04
€ 353,04 komadno (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
1
Tehnička dokumentacija
Tehnički podaci
Proizvođač
WagoProduct Type
PLC Programming Software
Type of Software
Windows Application
Software Name
WAGO-I/O-CHECK 2
Operating System
Windows 98
Standards/Approvals
No
Zemlja podrijetla
Germany
Detalji o proizvodu
WAGO-I/O-CHECK - Commissioning Tool For WAGO-I/O-SYSTEM 750
WAGO-I/O-CHECK is an easy-to-use Windows application for operating and displaying a WAGO-I/O-SYSTEM 750 node without connecting the node to a fieldbus system.
The software reads the configuration from the node and displays it as an on-screen graphic. The graphic can be printed together with a configuration list as documentation.
With WAGO-I/O-CHECK, it is possible to display and determine the process data of the bus modules. The field wiring, including all sensors and actuators, can thus be checked before startup.
Application-specific settings, such as the baud rate or sensor types, can be made with select interface, Pt100 and thermocouple modules. For communicating between WAGO-I/O-CHECK and the node, the coupler must be connected at a PC’s vacant serial or USB port using the communication cable supplied in the kit with the system.