Weidmuller 0128360000 SAK Series Beige, Yellow, 4mm², Single-Level, Feed Through Termination, ATEX, IECEx
Tehnička dokumentacija
Tehnički podaci
Proizvođač
WeidmüllerBoja
Beige, Yellow
Number of Levels
Single
Series
SAK
Voltage Rating
800 V
American Wire Gauge
26 → 10AWG
Termination Method
Feed Through
Cable CSA
4mm²
Current Rating
32A
Minimum Operating Temperature
-50°C
Maximum Operating Temperature
+100°C
Hazardous Area Certification
ATEX, IECEx
Standards Met
IEC 60947-7-1
Zemlja podrijetla
Romania
Detalji o proizvodu
Standard Terminals, End Covers, and Jumper Bars
Standard or feed through rated at 750V . Terminals of the same type may be cross connected using the pre-assembled jumper bars for up to 10 poles (2.5mm-16mm terminals) and 2 poles (35mm terminals).,TSCH partitions fit jumper bar cut outs.
Approvals
CSA certified, UL listed, NEMKO, SEV, KEMA, DEMKO
SAK Series
Terminals manufactured from polymide 6.6 with a working temperature of -50°C to +100°C except the fused terminal block (425-689) which is high grade melamine with a working temperature of -60°C to +130°C. Asymmetric rail (G-profile) to B 5825:1980 EN 50035 mounting
€ 20,80
€ 2,08 komadno (u pakiranju od 10) (bez PDV-a)
€ 26,00
€ 2,60 komadno (u pakiranju od 10) (s PDV-om)
10
€ 20,80
€ 2,08 komadno (u pakiranju od 10) (bez PDV-a)
€ 26,00
€ 2,60 komadno (u pakiranju od 10) (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
10
Informacije o stanju skladišta trenutno nisu dostupne.
Tehnička dokumentacija
Tehnički podaci
Proizvođač
WeidmüllerBoja
Beige, Yellow
Number of Levels
Single
Series
SAK
Voltage Rating
800 V
American Wire Gauge
26 → 10AWG
Termination Method
Feed Through
Cable CSA
4mm²
Current Rating
32A
Minimum Operating Temperature
-50°C
Maximum Operating Temperature
+100°C
Hazardous Area Certification
ATEX, IECEx
Standards Met
IEC 60947-7-1
Zemlja podrijetla
Romania
Detalji o proizvodu
Standard Terminals, End Covers, and Jumper Bars
Standard or feed through rated at 750V . Terminals of the same type may be cross connected using the pre-assembled jumper bars for up to 10 poles (2.5mm-16mm terminals) and 2 poles (35mm terminals).,TSCH partitions fit jumper bar cut outs.
Approvals
CSA certified, UL listed, NEMKO, SEV, KEMA, DEMKO
SAK Series
Terminals manufactured from polymide 6.6 with a working temperature of -50°C to +100°C except the fused terminal block (425-689) which is high grade melamine with a working temperature of -60°C to +130°C. Asymmetric rail (G-profile) to B 5825:1980 EN 50035 mounting