Tehnička dokumentacija
Tehnički podaci
Brand
4D SystemsProcessor Type
Audio Module
Mounting Type
Through Hole
Pin Count
16
Dimensions
21 x 20.5 x 11.3mm
Height
11.3mm
Length
21mm
Maximum Operating Temperature
+70 °C
Width
20.5mm
Minimum Operating Temperature
0 °C
Zemlja podrijetla
China
Detalji o proizvodu
SOMO-II Audio-Sound Module
The SOund MOdule 2 (SOMO-II), from 4D Systems, is a compact audio-sound module designed for all embedded audio-sound applications. The SOMO-II is designed to play MP3 audio files from a micro-SD card or USB 2.0 flash drive with extra components. An on-board 16-bit MCU is specifically designed for hardware audio decoding.
The files can be stored in the root folder of the micro-SD or USB flash drive. It can take up to 99 folders with 255 songs in each. The audio files can be loaded onto the micro-SD card or USB flash drive using a PC or laptop without additional software.
The SOMO-II offers two modes, SERIAL-MODE and KEY-MODE:
SERIAL-MODE has a 2-wire serial UART interface to a microcontroller via the TX and RX pins. A range of audio operations such as play, pause, stop, next, previous and volume control are available to the host micro through serial commands.
KEY-MODE is a stand-alone operation where the host micro is not needed. It is then possible to control the module with just a few push buttons.
4D Systems Display Accessories
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
RSD 6.734
Each (bez PDV-a)
RSD 8.081
Each (s PDV-om)
1
RSD 6.734
Each (bez PDV-a)
RSD 8.081
Each (s PDV-om)
1
Tehnička dokumentacija
Tehnički podaci
Brand
4D SystemsProcessor Type
Audio Module
Mounting Type
Through Hole
Pin Count
16
Dimensions
21 x 20.5 x 11.3mm
Height
11.3mm
Length
21mm
Maximum Operating Temperature
+70 °C
Width
20.5mm
Minimum Operating Temperature
0 °C
Zemlja podrijetla
China
Detalji o proizvodu
SOMO-II Audio-Sound Module
The SOund MOdule 2 (SOMO-II), from 4D Systems, is a compact audio-sound module designed for all embedded audio-sound applications. The SOMO-II is designed to play MP3 audio files from a micro-SD card or USB 2.0 flash drive with extra components. An on-board 16-bit MCU is specifically designed for hardware audio decoding.
The files can be stored in the root folder of the micro-SD or USB flash drive. It can take up to 99 folders with 255 songs in each. The audio files can be loaded onto the micro-SD card or USB flash drive using a PC or laptop without additional software.
The SOMO-II offers two modes, SERIAL-MODE and KEY-MODE:
SERIAL-MODE has a 2-wire serial UART interface to a microcontroller via the TX and RX pins. A range of audio operations such as play, pause, stop, next, previous and volume control are available to the host micro through serial commands.
KEY-MODE is a stand-alone operation where the host micro is not needed. It is then possible to control the module with just a few push buttons.