Bartec ComEx Series Illuminated Push Button, Panel Mount, SPST, IP20
Tehnička dokumentacija
Tehnički podaci
Brand
BartecIlluminated
Yes
Mounting Type
Panel Mount
Push Button Colour
Green
Contact Configuration
SPST
Push Button Style
Round
IP Rating
IP20
Push Button Material
Thermoplastic
Series
ComEx
Manufacturer Part No.
07-3363-4820 + 05-0042-0050 + 05-0003-006600
Terminal Type
Screw
Maximum DC Voltage
60V
Minimum Operating Temperature
-55°C
Operating Temperature Range
- 55 → +60°C
Maximum AC Voltage
250V
Maximum Operating Temperature
+60°C
Hazardous Area Certification
ATEX
Zemlja podrijetla
Germany
Detalji o proizvodu
Switch and Lamp Modules
Switch modules from Bartec can be used in almost all hazardous areas where machine functions are activated by means of a button or a switch. The ComExflex is flexible and in addition to a large number of actuating elements it, it has a junction box. The junction boxes facilitate the use of ComExflex in a control console or a control panel. The junction box features a cable gland and can be combined with various function modules.
All contacts in the switch modules are self-cleaning and the opening contacts have positive opening operation. The ComExflex lamp module indicates command modes by means of a light signal lighting up or going out. It is suitable for use in almost all hazardous areas which a visual indication of a machines functional status is required. The lamp module can be combined with various lamp module actuating elements.
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
RSD 55.388
Each (bez PDV-a)
RSD 66.465
Each (s PDV-om)
1
RSD 55.388
Each (bez PDV-a)
RSD 66.465
Each (s PDV-om)
1
Kupujte na veliko
| količina | Jedinična cena |
|---|---|
| 1 - 4 | RSD 55.388 |
| 5 - 9 | RSD 54.437 |
| 10+ | RSD 54.336 |
Tehnička dokumentacija
Tehnički podaci
Brand
BartecIlluminated
Yes
Mounting Type
Panel Mount
Push Button Colour
Green
Contact Configuration
SPST
Push Button Style
Round
IP Rating
IP20
Push Button Material
Thermoplastic
Series
ComEx
Manufacturer Part No.
07-3363-4820 + 05-0042-0050 + 05-0003-006600
Terminal Type
Screw
Maximum DC Voltage
60V
Minimum Operating Temperature
-55°C
Operating Temperature Range
- 55 → +60°C
Maximum AC Voltage
250V
Maximum Operating Temperature
+60°C
Hazardous Area Certification
ATEX
Zemlja podrijetla
Germany
Detalji o proizvodu
Switch and Lamp Modules
Switch modules from Bartec can be used in almost all hazardous areas where machine functions are activated by means of a button or a switch. The ComExflex is flexible and in addition to a large number of actuating elements it, it has a junction box. The junction boxes facilitate the use of ComExflex in a control console or a control panel. The junction box features a cable gland and can be combined with various function modules.
All contacts in the switch modules are self-cleaning and the opening contacts have positive opening operation. The ComExflex lamp module indicates command modes by means of a light signal lighting up or going out. It is suitable for use in almost all hazardous areas which a visual indication of a machines functional status is required. The lamp module can be combined with various lamp module actuating elements.
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.