Festo Pneumatic Guided Cylinder - 170912, 16mm Bore, 50mm Stroke, DFM Series, Double Acting
Tehnička dokumentacija
Tehnički podaci
Brand
FestoStroke
50mm
Bore
16mm
Manufacturer Series
DFM
Action
Double
Maximum Operating Pressure
10 bar
Cushioning Type
Elastomer
Model Number p
170912
Model Number (p)
170912
Dimensions
117 x 67 x 32mm
Weight
704g
Maximum Operating Temperature
+60°C
Length
117mm
Width
67mm
Height
32mm
Minimum Operating Temperature
-5°C
Zemlja podrijetla
Germany
Detalji o proizvodu
DFM Pneumatic Guided Cylinders - Ball Bearing
Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Recirculating ball bearings drive the guide rods making it ideal for applications where torque loads are present. Designed for high load pneumatic applications such as clamping, stopping, material handling and lifting. The sturdy and precise aluminium construction is maintenance free and highly resistant to torque and lateral external forces. A compact design incorporates the piston rod as part of the guide body.
The DFM series of guided actuators have flexible cushioning plates to reduce noise during operation and increase service life. Integrated slots on the actuator body allow for incorporating proximity sensors to measure the linear motion of the piston. Air supply ports on both the top and side of the cylinder provide flexible positioning options.
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
RSD 73.544
Each (bez PDV-a)
RSD 88.252
Each (s PDV-om)
1
RSD 73.544
Each (bez PDV-a)
RSD 88.252
Each (s PDV-om)
1
Tehnička dokumentacija
Tehnički podaci
Brand
FestoStroke
50mm
Bore
16mm
Manufacturer Series
DFM
Action
Double
Maximum Operating Pressure
10 bar
Cushioning Type
Elastomer
Model Number p
170912
Model Number (p)
170912
Dimensions
117 x 67 x 32mm
Weight
704g
Maximum Operating Temperature
+60°C
Length
117mm
Width
67mm
Height
32mm
Minimum Operating Temperature
-5°C
Zemlja podrijetla
Germany
Detalji o proizvodu
DFM Pneumatic Guided Cylinders - Ball Bearing
Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Recirculating ball bearings drive the guide rods making it ideal for applications where torque loads are present. Designed for high load pneumatic applications such as clamping, stopping, material handling and lifting. The sturdy and precise aluminium construction is maintenance free and highly resistant to torque and lateral external forces. A compact design incorporates the piston rod as part of the guide body.
The DFM series of guided actuators have flexible cushioning plates to reduce noise during operation and increase service life. Integrated slots on the actuator body allow for incorporating proximity sensors to measure the linear motion of the piston. Air supply ports on both the top and side of the cylinder provide flexible positioning options.