Tehnička dokumentacija
Tehnički podaci
Brand
KEMETType
Solid Core
Application
Consumer Electronics
Material
Ferrite
Outer Dimensions
28 x 7 x 7.7mm
Inner Dimensions
23.5 x 1.5mm
Openable
No
Inner Height
1.5mm
Inner Width
23.5mm
Outer Depth
7mm
Outer Height
7.7mm
Outer Width
28mm
Detalji o proizvodu
KEMET ESD-FPL Series Solid Cores
KEMET ESD-FPL series solid ferrite cores are designed for use in flat cables. These ferrite cores are made of solid construction andd thin minimal gap types available. Flat Ferrite cores are designed to eliminate severe interference on ribbon cables in digital devices or display controllers. These ferrite sleeves Simply thread over the cable before connectors are applied, and are held in position with heat shrink sleeving or can be glued in place.
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
RSD 7.512
RSD 150,23 komad (isporučivo u kutiji) (bez PDV-a)
RSD 9.014
RSD 180,276 komad (isporučivo u kutiji) (s PDV-om)
Proizvodno pakovanje (kutija)
50
RSD 7.512
RSD 150,23 komad (isporučivo u kutiji) (bez PDV-a)
RSD 9.014
RSD 180,276 komad (isporučivo u kutiji) (s PDV-om)
Proizvodno pakovanje (kutija)
50
Kupujte na veliko
količina | Jedinična cena | Po kutija |
---|---|---|
50 - 95 | RSD 150,23 | RSD 751 |
100 - 245 | RSD 147,617 | RSD 738 |
250 - 495 | RSD 139,779 | RSD 699 |
500+ | RSD 133,248 | RSD 666 |
Tehnička dokumentacija
Tehnički podaci
Brand
KEMETType
Solid Core
Application
Consumer Electronics
Material
Ferrite
Outer Dimensions
28 x 7 x 7.7mm
Inner Dimensions
23.5 x 1.5mm
Openable
No
Inner Height
1.5mm
Inner Width
23.5mm
Outer Depth
7mm
Outer Height
7.7mm
Outer Width
28mm
Detalji o proizvodu
KEMET ESD-FPL Series Solid Cores
KEMET ESD-FPL series solid ferrite cores are designed for use in flat cables. These ferrite cores are made of solid construction andd thin minimal gap types available. Flat Ferrite cores are designed to eliminate severe interference on ribbon cables in digital devices or display controllers. These ferrite sleeves Simply thread over the cable before connectors are applied, and are held in position with heat shrink sleeving or can be glued in place.