Tehnička dokumentacija
Tehnički podaci
Brand
MicrochipData Rate
12Mbps
Mounting Type
Surface Mount
Package Type
QFN
Pin Count
24
Transmitter Signal Type
Single Ended
Receiver Signal Type
Differential
Interface Standards
EMV 4.2/4.3, ETSI TS 102 221, ISO/IEC 7816, PC/SC
Power Supply Type
Single
Typical Single Supply Voltage
3.6 → 5.5 V
Height
0.95mm
Width
5.1mm
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+85 °C
Length
5.1mm
Dimensions
5.1 x 5.1 x 0.95mm
Zemlja podrijetla
Thailand
Detalji o proizvodu
SEC1110/1210 Smart Card to USB/SPI/UART Bridges
The Microchip SEC1110/1210 family of devices are Smart Card Bridge ICs with USB, SPI and UART interfaces. Through an effective combination of hardware and software the SEC1110 and SEC1210 offer a high-performance customisable solution. The SEC1110/1210 devices are certified to the latest USB and EMV standards to ensure interoperability with the latest and legacy Smart Card systems alike.
To simplify the development of custom USB-based applications these devices integrate USB Chip Card Interface Device (CCID) firmware. Also on-board is One-Time Programmable memory which can be utilised to host custom firmware or device data.
USB (Universal Serial Bus) - Microchip
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
P.O.A.
490
P.O.A.
490
Tehnička dokumentacija
Tehnički podaci
Brand
MicrochipData Rate
12Mbps
Mounting Type
Surface Mount
Package Type
QFN
Pin Count
24
Transmitter Signal Type
Single Ended
Receiver Signal Type
Differential
Interface Standards
EMV 4.2/4.3, ETSI TS 102 221, ISO/IEC 7816, PC/SC
Power Supply Type
Single
Typical Single Supply Voltage
3.6 → 5.5 V
Height
0.95mm
Width
5.1mm
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+85 °C
Length
5.1mm
Dimensions
5.1 x 5.1 x 0.95mm
Zemlja podrijetla
Thailand
Detalji o proizvodu
SEC1110/1210 Smart Card to USB/SPI/UART Bridges
The Microchip SEC1110/1210 family of devices are Smart Card Bridge ICs with USB, SPI and UART interfaces. Through an effective combination of hardware and software the SEC1110 and SEC1210 offer a high-performance customisable solution. The SEC1110/1210 devices are certified to the latest USB and EMV standards to ensure interoperability with the latest and legacy Smart Card systems alike.
To simplify the development of custom USB-based applications these devices integrate USB Chip Card Interface Device (CCID) firmware. Also on-board is One-Time Programmable memory which can be utilised to host custom firmware or device data.