Tehnička dokumentacija
Tehnički podaci
Number of Levels
Single
Colour
Grey
Overall Length
19,7 palců
Termination Method
Screw
Current Rating
30A
Voltage Rating
500 V
Dimensions
8 (Dia) x 10.5mm
Brand
Phoenix ContactSeries
UT 2.5-QUATTRO
Zemlja podrijetla
Germany
Detalji o proizvodu
RN-131 802.11b/g Wi-Fi Evaluation Kit
The RN-131-EK is a Wi-Fi evaluation kit for the RN131 module that can be used to quickly add Wi-Fi connectivity to embedded applications. It has the flexibility to connect directly to a PC via a standard USB interface or to embedded processors through the TTL/UART interface. The board also includes two convenient push buttons for controlling both SoftAP and WPS (Wi-Fi Protected Setup) mode without software configuration. The status LEDs and jumpers enable rapid prototyping and integration into existing systems. The RN131 module is programmed and controlled from a console with a simple ASCII command language. Once the configuration is set up, the module can automatically scan to find an access point, associate, authenticate, and connect over any Wi-Fi network. Additionally, the module can automatically wake up, send data to a remote host and then go back to a low-power sleep state.
Supplied with
USB cable
WLAN (Wireless Local Area Network) - Microchip Technology
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
RSD 398,436
Each (In a Pack of 5) (bez PDV-a)
RSD 478,123
Each (In a Pack of 5) (s PDV-om)
5
RSD 398,436
Each (In a Pack of 5) (bez PDV-a)
RSD 478,123
Each (In a Pack of 5) (s PDV-om)
5
Kupujte na veliko
količina | Jedinična cena | Po pakovanje |
---|---|---|
5 - 25 | RSD 398,436 | RSD 1.992 |
30+ | RSD 378,841 | RSD 1.894 |
Tehnička dokumentacija
Tehnički podaci
Number of Levels
Single
Colour
Grey
Overall Length
19,7 palců
Termination Method
Screw
Current Rating
30A
Voltage Rating
500 V
Dimensions
8 (Dia) x 10.5mm
Brand
Phoenix ContactSeries
UT 2.5-QUATTRO
Zemlja podrijetla
Germany
Detalji o proizvodu
RN-131 802.11b/g Wi-Fi Evaluation Kit
The RN-131-EK is a Wi-Fi evaluation kit for the RN131 module that can be used to quickly add Wi-Fi connectivity to embedded applications. It has the flexibility to connect directly to a PC via a standard USB interface or to embedded processors through the TTL/UART interface. The board also includes two convenient push buttons for controlling both SoftAP and WPS (Wi-Fi Protected Setup) mode without software configuration. The status LEDs and jumpers enable rapid prototyping and integration into existing systems. The RN131 module is programmed and controlled from a console with a simple ASCII command language. Once the configuration is set up, the module can automatically scan to find an access point, associate, authenticate, and connect over any Wi-Fi network. Additionally, the module can automatically wake up, send data to a remote host and then go back to a low-power sleep state.
Supplied with
USB cable