Tehnička dokumentacija
Tehnički podaci
Brand
Sensata / CrydomNormal State Configuration
3NO
Terminal Type
Screw
Length
45.31mm
Width
86.71mm
Depth
96.02mm
Load Voltage
48 V ac → 510V ac
Minimum Operating Temperature
-30°C
Input Current
7.5 mA → 13mA
Load Current
7.6A
Pole and Throw Configuration
3P
Mounting Style
DIN Rail Mount
Control Voltage
90 V ac → 140 V ac
Maximum Operating Temperature
+80°C
Zemlja podrijetla
Mexico
Detalji o proizvodu
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.
Solid State Contactors
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
RSD 16.068
Each (bez PDV-a)
RSD 19.282
Each (s PDV-om)
1
RSD 16.068
Each (bez PDV-a)
RSD 19.282
Each (s PDV-om)
1
Kupujte na veliko
količina | Jedinična cena |
---|---|
1 - 4 | RSD 16.068 |
5+ | RSD 15.415 |
Tehnička dokumentacija
Tehnički podaci
Brand
Sensata / CrydomNormal State Configuration
3NO
Terminal Type
Screw
Length
45.31mm
Width
86.71mm
Depth
96.02mm
Load Voltage
48 V ac → 510V ac
Minimum Operating Temperature
-30°C
Input Current
7.5 mA → 13mA
Load Current
7.6A
Pole and Throw Configuration
3P
Mounting Style
DIN Rail Mount
Control Voltage
90 V ac → 140 V ac
Maximum Operating Temperature
+80°C
Zemlja podrijetla
Mexico
Detalji o proizvodu
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.