TE Connectivity, DuraSeal Butt Splice Connector, Blue, Insulated, Tin 16 → 14 AWG
Tehnička dokumentacija
Tehnički podaci
Brand
TE ConnectivitySplice Type
Butt
Wire Size
16 → 14 AWG
Overall Length
36mm
Diameter
4.6mm
Insulation
Insulated
Colour
Blue
Series
Duraseal
Contact Material
Copper
Contact Plating
Tin
Zemlja podrijetla
Mexico
Detalji o proizvodu
Splices
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
RSD 4.572
RSD 91,444 komadno (u pakovanju od 50) (bez PDV-a)
RSD 5.487
RSD 109,733 komadno (u pakovanju od 50) (s PDV-om)
50
RSD 4.572
RSD 91,444 komadno (u pakovanju od 50) (bez PDV-a)
RSD 5.487
RSD 109,733 komadno (u pakovanju od 50) (s PDV-om)
50
Kupujte na veliko
| količina | Jedinična cena | Po pakovanje |
|---|---|---|
| 50 - 200 | RSD 91,444 | RSD 4.572 |
| 250 - 1200 | RSD 84,913 | RSD 4.246 |
| 1250 - 2450 | RSD 79,687 | RSD 3.984 |
| 2500 - 4950 | RSD 75,768 | RSD 3.788 |
| 5000+ | RSD 73,156 | RSD 3.658 |
Tehnička dokumentacija
Tehnički podaci
Brand
TE ConnectivitySplice Type
Butt
Wire Size
16 → 14 AWG
Overall Length
36mm
Diameter
4.6mm
Insulation
Insulated
Colour
Blue
Series
Duraseal
Contact Material
Copper
Contact Plating
Tin
Zemlja podrijetla
Mexico
Detalji o proizvodu
Splices
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed