Festo Pneumatic Guided Cylinder - 170831, 12mm Bore, 100mm Stroke, DFM Series, Double Acting
Tehnička dokumentacija
Tehnički podaci
Brand
FestoStroke
100mm
Bore
12mm
Manufacturer Series
DFM
Action
Double
Pneumatic Connection
M5
Maximum Operating Pressure
10 bar
Cushioning Type
Elastic
Model Number p
170831
Model Number (p)
170831
Dimensions
155 x 60 x 28mm
Weight
723g
Maximum Operating Temperature
+80°C
Length
155mm
Height
28mm
Minimum Operating Temperature
-20°C
Width
60mm
Zemlja podrijetla
Germany
Detalji o proizvodu
DFM Pneumatic Guided Cylinders - Slide Bearing
Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Four plain slide bearings on the large diameter guide rods provide high rigidity suitable for high loads. Designed for high load pneumatic applications such as clamping, stopping, material handling and lifting. The sturdy and precise aluminium construction is maintenance free and highly resistant to torque and lateral external forces. A compact design incorporates the piston rod as part of the guide body.
The DFM series of guided actuators have flexible cushioning plates to reduce noise during operation and increase service life. Integrated slots on the actuator body allow for incorporating proximity sensors to measure the linear motion of the piston. Air supply ports on both the top and side of the cylinder provide flexible positioning options.
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
RSD 50.185
Each (bez PDV-a)
RSD 60.222
Each (s PDV-om)
1
RSD 50.185
Each (bez PDV-a)
RSD 60.222
Each (s PDV-om)
1
Tehnička dokumentacija
Tehnički podaci
Brand
FestoStroke
100mm
Bore
12mm
Manufacturer Series
DFM
Action
Double
Pneumatic Connection
M5
Maximum Operating Pressure
10 bar
Cushioning Type
Elastic
Model Number p
170831
Model Number (p)
170831
Dimensions
155 x 60 x 28mm
Weight
723g
Maximum Operating Temperature
+80°C
Length
155mm
Height
28mm
Minimum Operating Temperature
-20°C
Width
60mm
Zemlja podrijetla
Germany
Detalji o proizvodu
DFM Pneumatic Guided Cylinders - Slide Bearing
Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Four plain slide bearings on the large diameter guide rods provide high rigidity suitable for high loads. Designed for high load pneumatic applications such as clamping, stopping, material handling and lifting. The sturdy and precise aluminium construction is maintenance free and highly resistant to torque and lateral external forces. A compact design incorporates the piston rod as part of the guide body.
The DFM series of guided actuators have flexible cushioning plates to reduce noise during operation and increase service life. Integrated slots on the actuator body allow for incorporating proximity sensors to measure the linear motion of the piston. Air supply ports on both the top and side of the cylinder provide flexible positioning options.