Hammond 1590 Series Natural Die Cast Aluminium Enclosure, IP66, IK08, Natural Lid, 175 x 80 x 60mm
Tehnička dokumentacija
Tehnički podaci
Brand
HammondBody Material
Die Cast Aluminium
External Length
175 mm
External Height
60 mm
External Width
80 mm
External Dimensions
175 x 80 x 60mm
Range
1590
IP Rating
IP66
Colour
Natural
Lid Colour
Natural
Flanged
No
Shielded
Yes
Series
1590
Number of Knockouts
0
IK Rating
IK08
Weight
617g
Explosion Proof
No
Gasket Material
Silicone
Detalji o proizvodu
Watertight Thick Wall Diecast Aluminium Enclosure, IP66
Hammond Manufacturing 1590X Diecast Aluminum Enclosures are rugged and easy to machine electronic instrument enclosures.These enclosures provide low wide wall draft angles (2 degrees or less) for easy mounting of printed circuit board. 1590X are lap joint constructed to provide protection against access of dust and splashing water, as well as improved EMI/RFI shielding. These enclosures provide the unpainted version in vibra finish to assure no sharp edges. The satin black version is painted with tough polyester powder paint for a lasting finish, even after machining. 1590X enclosures are available with four (4) 6-32 x 1/2" machine screws to secure the lid into factory tapped holes
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
RSD 7.262
Each (bez PDV-a)
RSD 8.714
Each (s PDV-om)
1
RSD 7.262
Each (bez PDV-a)
RSD 8.714
Each (s PDV-om)
1
Kupujte na veliko
| količina | Jedinična cena |
|---|---|
| 1 - 4 | RSD 7.262 |
| 5 - 9 | RSD 6.998 |
| 10 - 24 | RSD 6.911 |
| 25 - 49 | RSD 6.788 |
| 50+ | RSD 6.640 |
Tehnička dokumentacija
Tehnički podaci
Brand
HammondBody Material
Die Cast Aluminium
External Length
175 mm
External Height
60 mm
External Width
80 mm
External Dimensions
175 x 80 x 60mm
Range
1590
IP Rating
IP66
Colour
Natural
Lid Colour
Natural
Flanged
No
Shielded
Yes
Series
1590
Number of Knockouts
0
IK Rating
IK08
Weight
617g
Explosion Proof
No
Gasket Material
Silicone
Detalji o proizvodu
Watertight Thick Wall Diecast Aluminium Enclosure, IP66
Hammond Manufacturing 1590X Diecast Aluminum Enclosures are rugged and easy to machine electronic instrument enclosures.These enclosures provide low wide wall draft angles (2 degrees or less) for easy mounting of printed circuit board. 1590X are lap joint constructed to provide protection against access of dust and splashing water, as well as improved EMI/RFI shielding. These enclosures provide the unpainted version in vibra finish to assure no sharp edges. The satin black version is painted with tough polyester powder paint for a lasting finish, even after machining. 1590X enclosures are available with four (4) 6-32 x 1/2" machine screws to secure the lid into factory tapped holes