Tehnička dokumentacija
Tehnički podaci
Brand
HartingGender
Female
Wire Size
24 → 28 AWG
Contact Material
Brass
Termination Method
Crimp
Contact Plating
PdNi
Contact Type
Pin
Maximum Contact Resistance
≤10MΩ
Minimum Wire Size mm²
0.09mm²
Minimum Wire Size (mm²)
0.09mm²
Maximum Wire Size mm²
0.25mm²
Maximum Wire Size (mm²)
0.25mm²
Series
D-Sub Standard
Current Rating
6.5A
Length
14.1mm
Minimum Wire Size AWG
28AWG
Maximum Wire Size AWG
24AWG
Maximum Wire Size (AWG)
24AWG
Minimum Wire Size (AWG)
28AWG
Zemlja podrijetla
Germany
Detalji o proizvodu
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Standards
IEC 60 807
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
RSD 58,786
komadno (u pakovanju od 25) (bez PDV-a)
RSD 70,543
komadno (u pakovanju od 25) (s PDV-om)
25
RSD 58,786
komadno (u pakovanju od 25) (bez PDV-a)
RSD 70,543
komadno (u pakovanju od 25) (s PDV-om)
25
Kupujte na veliko
količina | Jedinična cena | Po pakovanje |
---|---|---|
25 - 75 | RSD 58,786 | RSD 1.470 |
100 - 225 | RSD 57,479 | RSD 1.437 |
250+ | RSD 52,254 | RSD 1.306 |
Tehnička dokumentacija
Tehnički podaci
Brand
HartingGender
Female
Wire Size
24 → 28 AWG
Contact Material
Brass
Termination Method
Crimp
Contact Plating
PdNi
Contact Type
Pin
Maximum Contact Resistance
≤10MΩ
Minimum Wire Size mm²
0.09mm²
Minimum Wire Size (mm²)
0.09mm²
Maximum Wire Size mm²
0.25mm²
Maximum Wire Size (mm²)
0.25mm²
Series
D-Sub Standard
Current Rating
6.5A
Length
14.1mm
Minimum Wire Size AWG
28AWG
Maximum Wire Size AWG
24AWG
Maximum Wire Size (AWG)
24AWG
Minimum Wire Size (AWG)
28AWG
Zemlja podrijetla
Germany
Detalji o proizvodu
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Standards
IEC 60 807