Tehnička dokumentacija
Tehnički podaci
Brand
ITT CannonNumber Of Contacts
12
Mounting Type
Panel Mount
Connector Size
Standard
Plug/Socket
Socket
Contact Gender
Female
Termination Method
Crimp
IP Rating
IP67
Series
Trident Neptune
Body Orientation
Straight
Housing Material
Polymer
Contact Plating
Nickel
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+105°C
Contact Material
Copper
Zemlja podrijetla
Hungary
Detalji o proizvodu
Panel Plug and Socket Shells
Panel plugs and sockets feature the same rear sealing arrangement. Again, the retaining ring may be discarded in favour of a backshell if required.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
RSD 3.863
Each (bez PDV-a)
RSD 4.635
Each (s PDV-om)
1
RSD 3.863
Each (bez PDV-a)
RSD 4.635
Each (s PDV-om)
1
Kupujte na veliko
količina | Jedinična cena |
---|---|
1 - 19 | RSD 3.863 |
20 - 39 | RSD 3.526 |
40+ | RSD 3.306 |
Tehnička dokumentacija
Tehnički podaci
Brand
ITT CannonNumber Of Contacts
12
Mounting Type
Panel Mount
Connector Size
Standard
Plug/Socket
Socket
Contact Gender
Female
Termination Method
Crimp
IP Rating
IP67
Series
Trident Neptune
Body Orientation
Straight
Housing Material
Polymer
Contact Plating
Nickel
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+105°C
Contact Material
Copper
Zemlja podrijetla
Hungary
Detalji o proizvodu
Panel Plug and Socket Shells
Panel plugs and sockets feature the same rear sealing arrangement. Again, the retaining ring may be discarded in favour of a backshell if required.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.