Kübler K07 Counter, 7 Digit, 10Hz, 12 V dc

RS kataloški broj:: 656-5929brend: KüblerProizvođački broj:: 1.139.200.012
brand-logo
Prikaži sve u Counters

Tehnička dokumentacija

Tehnički podaci

Brand

Kübler

Supply Voltage

12 V dc

Count Mode

Impulses

Input Type

Voltage

Connection Type

Solder Pin

Reset Method

No Reset

Number Of Digits

7

Mounting Type

Panel Mount

Count Direction

Up

Digit Height

4 mm

Maximum Count Frequency

10Hz

Minimum Operating Temperature

-10°C

Maximum Operating Temperature

+85°C

Series

K07

Zemlja podrijetla

Germany

Detalji o proizvodu

Type K07 - micro cumulative counter, 7-digit, front panel mounting

PCB, Surface & DIN Rail Mounting

All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil terminals.,Count rate of all products is 10Hz.

You may be interested in

Informacije o stanju skladišta trenutno nisu dostupne.

Proverite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

RSD 4.807

Each (bez PDV-a)

RSD 5.769

Each (s PDV-om)

Kübler K07 Counter, 7 Digit, 10Hz, 12 V dc

RSD 4.807

Each (bez PDV-a)

RSD 5.769

Each (s PDV-om)

Kübler K07 Counter, 7 Digit, 10Hz, 12 V dc
Informacije o stanju skladišta trenutno nisu dostupne.
You may be interested in

Tehnička dokumentacija

Tehnički podaci

Brand

Kübler

Supply Voltage

12 V dc

Count Mode

Impulses

Input Type

Voltage

Connection Type

Solder Pin

Reset Method

No Reset

Number Of Digits

7

Mounting Type

Panel Mount

Count Direction

Up

Digit Height

4 mm

Maximum Count Frequency

10Hz

Minimum Operating Temperature

-10°C

Maximum Operating Temperature

+85°C

Series

K07

Zemlja podrijetla

Germany

Detalji o proizvodu

Type K07 - micro cumulative counter, 7-digit, front panel mounting

PCB, Surface & DIN Rail Mounting

All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil terminals.,Count rate of all products is 10Hz.

You may be interested in