Tehnička dokumentacija
Tehnički podaci
Brand
LegrisConnector A
R 1/2 Male
Connector B
Push In 16 mm
Pneumatic Fitting Type
Elbow Threaded Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
R 1/2 Male
Manufacturer Series
LF3000
Thread Material
Nickel Plated Brass
Angle
90°
Maximum Operating Pressure
20 bar
Swivel Connection
Yes
Body Material
Plastic
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+80°C
Mounting Type
Inline
Standards Met
EC/42/2006
Zemlja podrijetla
France
Detalji o proizvodu
Stud Elbow Adaptor - Male Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
3109 fittings are for the connection of tubing at 90° with a male thread. They can be tightened using a flat spanner or an Allen key if the installation is short on space.
Threaded Tube Adaptors, Elbows and Tees
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
RSD 3.592,46
komadno (u pakovanju od 5) (bez PDV-a)
RSD 4.310,952
komadno (u pakovanju od 5) (s PDV-om)
5
RSD 3.592,46
komadno (u pakovanju od 5) (bez PDV-a)
RSD 4.310,952
komadno (u pakovanju od 5) (s PDV-om)
5
Tehnička dokumentacija
Tehnički podaci
Brand
LegrisConnector A
R 1/2 Male
Connector B
Push In 16 mm
Pneumatic Fitting Type
Elbow Threaded Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
R 1/2 Male
Manufacturer Series
LF3000
Thread Material
Nickel Plated Brass
Angle
90°
Maximum Operating Pressure
20 bar
Swivel Connection
Yes
Body Material
Plastic
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+80°C
Mounting Type
Inline
Standards Met
EC/42/2006
Zemlja podrijetla
France
Detalji o proizvodu
Stud Elbow Adaptor - Male Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
3109 fittings are for the connection of tubing at 90° with a male thread. They can be tightened using a flat spanner or an Allen key if the installation is short on space.