McLennan Servo Supplies Unipolar Permanent Magnet Stepper Motor 1.8°, 6.2Nm, 120 V dc, 6.4 A, 8 Wires

RS kataloški broj:: 340-3761brend: McLennan Servo SuppliesProizvođački broj:: 34HSX-312
brand-logo
Prikaži sve u DC Motors

Tehnička dokumentacija

Tehnički podaci

Shaft Diameter

9.53mm

Current Rating

6.4 A

Step Angle

1.8°

Zemlja podrijetla

Italy

Detalji o proizvodu

HSX Range Stepper Motors, with Wire

The high performance 23HSX series hybrid stepper motors conform to the International NEMA standard.

0.9° and 1.8° Hybrid Stepper Motors

1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include:

Informacije o stanju skladišta trenutno nisu dostupne.

Proverite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

P.O.A.

McLennan Servo Supplies Unipolar Permanent Magnet Stepper Motor 1.8°, 6.2Nm, 120 V dc, 6.4 A, 8 Wires

P.O.A.

McLennan Servo Supplies Unipolar Permanent Magnet Stepper Motor 1.8°, 6.2Nm, 120 V dc, 6.4 A, 8 Wires
Informacije o stanju skladišta trenutno nisu dostupne.

Tehnička dokumentacija

Tehnički podaci

Shaft Diameter

9.53mm

Current Rating

6.4 A

Step Angle

1.8°

Zemlja podrijetla

Italy

Detalji o proizvodu

HSX Range Stepper Motors, with Wire

The high performance 23HSX series hybrid stepper motors conform to the International NEMA standard.

0.9° and 1.8° Hybrid Stepper Motors

1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include: