Microchip HV9120P-G, PWM Controller, 13.5 V, 3 MHz 16-Pin, PDIP
Tehnička dokumentacija
Tehnički podaci
Brand
MicrochipMaximum Switching Frequency
3 MHz
Output Voltage
4.16 V
Output Current
10 mA
Number of Outputs
1
Control Method
Current, Voltage
Fall Time
75ns
Mounting Type
Through Hole
Rise Time
75ns
Package Type
PDIP
Pin Count
16
Maximum Duty Cycle
49.6%
Dimensions
0.81 x 0.28 x 0.195in
Length
20.57mm
PWM Controller Type
Current Mode
Width
0.28in
Height
4.95mm
Maximum Operating Supply Voltage
13.5 V
Minimum Operating Temperature
-55 °C
Minimum Operating Supply Voltage
9 V
Maximum Operating Temperature
+125 °C
Detalji o proizvodu
HV912x Series High-Voltage Current-Mode PWM Controllers
The Microchip HV912x range of high-voltage current-mode PWM controllers are Switch Mode Power Supply (SMPS) controller subsystems that can start and run directly from almost any DC input such as 12V batteries and a rectified and filtered 240VAC line.
These devices can self-start directly from a high voltage input and subsequently take the power to operate from one of the outputs of the converter it is controlling, allowing very efficient operation while maintaining input-to-output galvanic isolation limited in voltage only by the insulation system of the associated magnetic assembly. A ±2% internal bandgap reference, internal operational amplifier, very high speed comparator, and output buffer allow production of rugged, high performance, high efficiency power supplies of 50W or more, which can still be over 80% efficient at outputs of 1.0W or less. Remote on/off controls allow either latching or nonlatching remote shutdown. During shutdown, the power required is under 6.0mW.
PWM (Pulse Width Modulation) Controllers, Microchip
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 3,01
Each (In a Tube of 24) (bez PDV-a)
€ 3,522
Each (In a Tube of 24) (s PDV-om)
24
€ 3,01
Each (In a Tube of 24) (bez PDV-a)
€ 3,522
Each (In a Tube of 24) (s PDV-om)
24
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Tehnička dokumentacija
Tehnički podaci
Brand
MicrochipMaximum Switching Frequency
3 MHz
Output Voltage
4.16 V
Output Current
10 mA
Number of Outputs
1
Control Method
Current, Voltage
Fall Time
75ns
Mounting Type
Through Hole
Rise Time
75ns
Package Type
PDIP
Pin Count
16
Maximum Duty Cycle
49.6%
Dimensions
0.81 x 0.28 x 0.195in
Length
20.57mm
PWM Controller Type
Current Mode
Width
0.28in
Height
4.95mm
Maximum Operating Supply Voltage
13.5 V
Minimum Operating Temperature
-55 °C
Minimum Operating Supply Voltage
9 V
Maximum Operating Temperature
+125 °C
Detalji o proizvodu
HV912x Series High-Voltage Current-Mode PWM Controllers
The Microchip HV912x range of high-voltage current-mode PWM controllers are Switch Mode Power Supply (SMPS) controller subsystems that can start and run directly from almost any DC input such as 12V batteries and a rectified and filtered 240VAC line.
These devices can self-start directly from a high voltage input and subsequently take the power to operate from one of the outputs of the converter it is controlling, allowing very efficient operation while maintaining input-to-output galvanic isolation limited in voltage only by the insulation system of the associated magnetic assembly. A ±2% internal bandgap reference, internal operational amplifier, very high speed comparator, and output buffer allow production of rugged, high performance, high efficiency power supplies of 50W or more, which can still be over 80% efficient at outputs of 1.0W or less. Remote on/off controls allow either latching or nonlatching remote shutdown. During shutdown, the power required is under 6.0mW.
PWM (Pulse Width Modulation) Controllers, Microchip
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda