MCP4261-502E/P, Digital Potentiometer 5kΩ 257-Position Linear 2-Channel Serial-SPI 14 Pin, PDIP
Tehnička dokumentacija
Tehnički podaci
Brand
MicrochipControl Interface
Serial-SPI
Resistance Value
5kΩ
Number of Positions
257
Taper Type
Linear
Memory Type
Non-Volatile
Number of Pots per Package
2
Mounting Type
Through Hole
Package Type
PDIP
Pin Count
14
Power Supply Type
Single
Typical Single Supply Voltage
1.8 to 5.5 V
Dimensions
0.4 x 0.28 x 0.195in
Height
4.95mm
Minimum Operating Temperature
-40 °C
Length
10.16mm
Width
0.28in
Maximum Operating Temperature
+125 °C
Detalji o proizvodu
MCP414x/416x/424x/426x Digital Potentiometers
The Microchip MCP413x, MCP415x, MCP423x and MCP425x range of devices are Digital Potentiometers with a SPI interface and EEPROM memory.
Featured is WiperLock Technology, providing a method of ’locking’ the wiper configuration. To unlock a high-voltage command is required (>8.5 V), protecting the setting during normal operation.
7-bit (129 steps) and 8-bit (257 steps) versions are available in various RAB resistance options from 5 kΩ to 100 kΩ. Further variants also give the choice between Rheostat and Potentiometer pinouts, Single and Dual Resistor Network options are also available.
Digital Potentiometer - Microchip
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
€ 24,00
€ 2,40 komadno (isporučuje se u cijevi) (bez PDV-a)
€ 28,08
€ 2,808 komadno (isporučuje se u cijevi) (s PDV-om)
Proizvodno pakovanje (cijev)
10
€ 24,00
€ 2,40 komadno (isporučuje se u cijevi) (bez PDV-a)
€ 28,08
€ 2,808 komadno (isporučuje se u cijevi) (s PDV-om)
Proizvodno pakovanje (cijev)
10
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
| količina | Jedinična cijena | Po cijev |
|---|---|---|
| 10 - 22 | € 2,40 | € 4,80 |
| 24 - 98 | € 2,35 | € 4,70 |
| 100+ | € 2,30 | € 4,60 |
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Tehnička dokumentacija
Tehnički podaci
Brand
MicrochipControl Interface
Serial-SPI
Resistance Value
5kΩ
Number of Positions
257
Taper Type
Linear
Memory Type
Non-Volatile
Number of Pots per Package
2
Mounting Type
Through Hole
Package Type
PDIP
Pin Count
14
Power Supply Type
Single
Typical Single Supply Voltage
1.8 to 5.5 V
Dimensions
0.4 x 0.28 x 0.195in
Height
4.95mm
Minimum Operating Temperature
-40 °C
Length
10.16mm
Width
0.28in
Maximum Operating Temperature
+125 °C
Detalji o proizvodu
MCP414x/416x/424x/426x Digital Potentiometers
The Microchip MCP413x, MCP415x, MCP423x and MCP425x range of devices are Digital Potentiometers with a SPI interface and EEPROM memory.
Featured is WiperLock Technology, providing a method of ’locking’ the wiper configuration. To unlock a high-voltage command is required (>8.5 V), protecting the setting during normal operation.
7-bit (129 steps) and 8-bit (257 steps) versions are available in various RAB resistance options from 5 kΩ to 100 kΩ. Further variants also give the choice between Rheostat and Potentiometer pinouts, Single and Dual Resistor Network options are also available.
Digital Potentiometer - Microchip
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda