RS PRO Stepper Motor, 1.76Nm Torque, 5.1 V, 1.8°, 56.4 x 56.4mm Frame, 6.35mm Shaft
Tehnička dokumentacija
Tehnički podaci
Brand
RS ProStep Angle
1.8°
Holding Torque
1.76Nm
Number Of Wires
6
Supply Voltage
5.1 V
Frame Size
56.4 x 56.4mm
Shaft Diameter
6.35mm
Current Rating
3 A
Winding Arrangement
Unipolar
Shaft Length
139.6mm
Depth
103mm
Resistance Per Phase
1.7Ω
Standards Met
RoHS Compliant
Zemlja podrijetla
Taiwan, Province Of China
Detalji o proizvodu
Stepper Motors With/Without Rear Shaft Extensions
RS Pro stepper motors with 6 or 8 lead configuration.
0.9° and 1.8° Hybrid Stepper Motors
1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include:
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
P.O.A.
1
P.O.A.
1
Tehnička dokumentacija
Tehnički podaci
Brand
RS ProStep Angle
1.8°
Holding Torque
1.76Nm
Number Of Wires
6
Supply Voltage
5.1 V
Frame Size
56.4 x 56.4mm
Shaft Diameter
6.35mm
Current Rating
3 A
Winding Arrangement
Unipolar
Shaft Length
139.6mm
Depth
103mm
Resistance Per Phase
1.7Ω
Standards Met
RoHS Compliant
Zemlja podrijetla
Taiwan, Province Of China
Detalji o proizvodu
Stepper Motors With/Without Rear Shaft Extensions
RS Pro stepper motors with 6 or 8 lead configuration.
0.9° and 1.8° Hybrid Stepper Motors
1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include: