Sensata Cynergy3 SSF28 Series Vertical Stainless Steel Float Switch, Float, 350mm Cable, Direct Load, 300V ac Max, 300V
Tehnička dokumentacija
Tehnički podaci
Brand
Sensata / Cynergy3Device Type
Float
Mounting Type
Vertical
Switch Output
Direct Load
Body Material
Stainless Steel
Cable Length
350mm
Minimum Operating Temperature
-10°C
Maximum Operating Temperature
+120°C
Maximum ac Voltage
300V
Maximum dc Voltage
300V
Maximum Current
500 mA
Maximum Pressure
40bar
Series
SSF28
Current Rating
500 mA
Zemlja podrijetla
Japan
Detalji o proizvodu
Stainless Steel High Pressure Float Switch – Vertical Mount
SSF28 series float switch has been designed to work at high pressures and can be vertically mounted within the tank.
Warning
The Cable entry point must NOT under any circumstances be submerged.
On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
On the vertical type the mounting thread and cable entry must be above the highest level of the liquid.
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
RSD 26.911
Each (bez PDV-a)
RSD 32.293
Each (s PDV-om)
1
RSD 26.911
Each (bez PDV-a)
RSD 32.293
Each (s PDV-om)
1
Kupujte na veliko
| količina | Jedinična cena |
|---|---|
| 1 - 4 | RSD 26.911 |
| 5+ | RSD 26.519 |
Tehnička dokumentacija
Tehnički podaci
Brand
Sensata / Cynergy3Device Type
Float
Mounting Type
Vertical
Switch Output
Direct Load
Body Material
Stainless Steel
Cable Length
350mm
Minimum Operating Temperature
-10°C
Maximum Operating Temperature
+120°C
Maximum ac Voltage
300V
Maximum dc Voltage
300V
Maximum Current
500 mA
Maximum Pressure
40bar
Series
SSF28
Current Rating
500 mA
Zemlja podrijetla
Japan
Detalji o proizvodu
Stainless Steel High Pressure Float Switch – Vertical Mount
SSF28 series float switch has been designed to work at high pressures and can be vertically mounted within the tank.
Warning
The Cable entry point must NOT under any circumstances be submerged.
On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
On the vertical type the mounting thread and cable entry must be above the highest level of the liquid.