TE Connectivity Heat Shrink Tubing, Black 9.5mm Sleeve Dia. x 300mm Length 3:1 Ratio, SCL Series
Tehnička dokumentacija
Tehnički podaci
Brand
TE ConnectivitySleeve Diameter
9.5mm
Colour
Black
Shrunk Diameter
3.4mm
Sleeve Type
Heat Shrink
Adhesive Lined
No
Shrink Ratio
3:1
Sleeve Length
300mm
Material
Polyolefin
Operating Temperature Range
-55 → +110 °C
Flame Retardant
No
Halogen Free
No
Series
SCL
Zemlja podrijetla
Czech Republic
Detalji o proizvodu
Raychem SCL™
SCL tubing is a semi-rigid heat shrinkable tubing with a meltable inner wall, designed to provide one-step moisture proof encapsulation of a wide variety of electrical parts including wire splices, breakouts, and electronic components. Manufactured from radiation cross linked polyolefins, the outer wall shrinks when heated to above 135°C, while the inner wall (which melts at 100°C) flows into the crevices and interstices by the shrinking action of the outer tubing. When cooled the entire mass becomes a rigid, tough, homogenous covering with a controlled wall thickness. SCL® shrinks to between 17% and 40% of its supplied diameter according to size, and therefore few sizes are required to cover a range of irregular shapes with widely varying dimensions. Unaffected by most solvents and chemicals and non-corrosive in contact with electrical joints, SCL also has high dielectric strength (240-410 kV/cm dependent on wall thickness). Colour: Black.,Sizes quoted are as supplied.
Standards
AMS-DTL 23053/ 4 class 1.
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
RSD 715,879
komadno (u pakovanju od 5) (bez PDV-a)
RSD 859,055
komadno (u pakovanju od 5) (s PDV-om)
5
RSD 715,879
komadno (u pakovanju od 5) (bez PDV-a)
RSD 859,055
komadno (u pakovanju od 5) (s PDV-om)
5
Kupujte na veliko
| količina | Jedinična cena | Po pakovanje |
|---|---|---|
| 5 - 70 | RSD 715,879 | RSD 3.579 |
| 75 - 245 | RSD 689,752 | RSD 3.449 |
| 250+ | RSD 680,608 | RSD 3.403 |
Tehnička dokumentacija
Tehnički podaci
Brand
TE ConnectivitySleeve Diameter
9.5mm
Colour
Black
Shrunk Diameter
3.4mm
Sleeve Type
Heat Shrink
Adhesive Lined
No
Shrink Ratio
3:1
Sleeve Length
300mm
Material
Polyolefin
Operating Temperature Range
-55 → +110 °C
Flame Retardant
No
Halogen Free
No
Series
SCL
Zemlja podrijetla
Czech Republic
Detalji o proizvodu
Raychem SCL™
SCL tubing is a semi-rigid heat shrinkable tubing with a meltable inner wall, designed to provide one-step moisture proof encapsulation of a wide variety of electrical parts including wire splices, breakouts, and electronic components. Manufactured from radiation cross linked polyolefins, the outer wall shrinks when heated to above 135°C, while the inner wall (which melts at 100°C) flows into the crevices and interstices by the shrinking action of the outer tubing. When cooled the entire mass becomes a rigid, tough, homogenous covering with a controlled wall thickness. SCL® shrinks to between 17% and 40% of its supplied diameter according to size, and therefore few sizes are required to cover a range of irregular shapes with widely varying dimensions. Unaffected by most solvents and chemicals and non-corrosive in contact with electrical joints, SCL also has high dielectric strength (240-410 kV/cm dependent on wall thickness). Colour: Black.,Sizes quoted are as supplied.
Standards
AMS-DTL 23053/ 4 class 1.