TE Connectivity, DuraSeal Butt Splice Connector, Yellow, Insulated, Tin 12 → 10 AWG
Tehnička dokumentacija
Tehnički podaci
Brand
TE ConnectivitySplice Type
Butt
Wire Size
12 → 10 AWG
Overall Length
43mm
Diameter
6.5mm
Insulation
Insulated
Colour
Yellow
Series
Duraseal
Contact Material
Copper
Contact Plating
Tin
Thickness
3mm
Zemlja podrijetla
Mexico
Detalji o proizvodu
Splices
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
RSD 8.426
RSD 168,519 komadno (u pakovanju od 50) (bez PDV-a)
RSD 10.111
RSD 202,223 komadno (u pakovanju od 50) (s PDV-om)
50
RSD 8.426
RSD 168,519 komadno (u pakovanju od 50) (bez PDV-a)
RSD 10.111
RSD 202,223 komadno (u pakovanju od 50) (s PDV-om)
50
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
| količina | Jedinična cena | Po pakovanje |
|---|---|---|
| 50 - 200 | RSD 168,519 | RSD 8.426 |
| 250 - 1200 | RSD 156,762 | RSD 7.838 |
| 1250 - 2450 | RSD 146,311 | RSD 7.316 |
| 2500 - 4950 | RSD 139,779 | RSD 6.989 |
| 5000+ | RSD 134,554 | RSD 6.728 |
Tehnička dokumentacija
Tehnički podaci
Brand
TE ConnectivitySplice Type
Butt
Wire Size
12 → 10 AWG
Overall Length
43mm
Diameter
6.5mm
Insulation
Insulated
Colour
Yellow
Series
Duraseal
Contact Material
Copper
Contact Plating
Tin
Thickness
3mm
Zemlja podrijetla
Mexico
Detalji o proizvodu
Splices
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed